background image

3

8QLWVSHFL¿FDWLRQV

Precautions for waste disposal

Your Air Conditioning product may be marked with this symbol. It means that waste electrical and 
electronic equipment (WEEE as in directive 2012/19/EU) should not be mixed with general 

household waste. Air conditioners should be treated at an authorized treatment facility for re-use, 
recycling and recovery and not be disposed of in the municipal waste stream. Please contact the installer 
or local authority for more information.

Never disassemble the remote control.

     If you touch internal parts accidentally, you could get electric shocks or cause trouble.

    Consult your dealer when it is necessary to inspect its interior.

Do not wash the remote control with water or liquid.

    

,WFRXOGFDXVHHOHFWULFVKRFNV¿UHRUEUHDNGRZQ

Do not touch electric parts or operate buttons or screens with wet hands.

    

,WFRXOGFDXVHHOHFWULFVKRFNV¿UHRUEUHDNGRZQ

Do not dispose the remote control by yourself.

    

 It could destruct the environment. Ask your dealer when it is necessary to dispose the 

remote control.

Note

The remote control should not be installed where it is exposed to 
direct sunlight or the ambient temperatures become higher than 40

°

or lower than 0

°

C.

    

It could cause deformation, discoloration or break-down.

Do not use benzene, paint thinner, wipes etc. to clean the remote control.

    

 It could discolor or break-down the remote control. Wipe it with a piece of cloth which is 

squeezed tightly after wetting with diluted neutral detergent. Finish up the cleaning by 

wiping with a piece of dry cloth.

Do not pull or twist the cable of the remote control.

    

It could cause break-down.

Do not tap the remote control buttons or screen with pointed objects.

    

It could damage or cause break-down.

Item

Description

Product dimensions

120 (W) x 120 (H) x 19 (D) mm (not including protruded section)

Weight

0.20 kg

Power supply

DC 18 V

Power consumption

0.6 W

Usage environment

Temperature: 0 to 40 °C

Material

Casing: ABS

Summary of Contents for RC-EXZ3A




















































































Reviews: