– 13 –
HIGH POWER/ECONOMY operation procedure
2
If the air-conditioner is not operating, aim the remote control at the air-conditioner.
Press the ON/OFF button.
Press the HI POWER/ECONO button.
•
When the operating mode is AUTO, COOL or HEAT
Each time the HI POWER/ECONO button is pressed, the indicator is switched
in the order of:
No indication
•
When the operating mode is DRY, FAN or PROGRAM TIMER
Each time the HI POWER/ECONO button is pressed, the indicator is switched
in the order of:
No indication
1
(HIGH POWER)
(ECONOMY)
(Normal operation)
(ECONOMY)
(Normal operation)
Concerning HIGH POWER operation
Pressing the HI POWER/ECONO button intensifies the operating power and initiates powerful cooling or heating operation for 15 minutes
continuously. The remote control
indicates but the FAN SPEED indication is erased.
•
During the HIGH POWER operation, the room temperature is not
controlled. When it causes an excessive cooling or heating,press
the HI POWER/ECONO button once more to cancel the HIGH
POWER operation.
•
HIGH POWER operation is not available during the DRY, the
program timer and 3D AUTO operations.
•
During ON timer operation, HIGH POWER operation will start
when the ON time is reached.
•
When the following operations are conducted HIGH POWER op-
eration will be canceled.
1
When the HI POWER/ECONO button is pressed again.
2
When the operation mode is changed.
3
When it has been 15 min. since HIGH POWER operation
has started.
4
When the 3D AUTO button is pressed.
Concerning ECONOMY operation
Pressing the HI POWER/ECONO button intlates a soft operation with the power suppressed in order to avoid an excessive cooling or heating. The
unit operates 1.5°C higher than the setting temperature for weak wind capacity during cooling or 2.5°C lower than that during heating. The remote
control
indicates but the FAN SPEED indication is eraseed.
NOTE
NOTE
•
It will go into ECONOMY operation the next time the air-condi-
tioner runs in the following instances.
1
When the air-conditioner is stopped using the ON/OFF but-
ton.
2
When the air-conditioner is stopped in SLEEP or OFF TIMER
operation.
3
When CLEAN operation ends.
•
ECONOMY operation is not available during 3D AUTO operation.
•
When the following operations are conducted ECONOMY opera-
tion will be canceled.
1
When the HI POWER/ECONO button is pressed again.
2
When the operation mode is changed DRY to FAN.
3
When the 3D AUTO button is pressed.
RWA012A246_En.p65
06.9.25, 11:05 AM
13
