– 7 –
AUTO
HI
MED
LO
NOTE
•
Air is not blowing out during the op-
eration.
Page 20
•
Simultaneous automatic operation.
Page 21
•
When the included clean filter is in-
stalled the air conditioner will clean
the air during automatic operation.
•
When changing FAN SPEED from HI to LO, the sound of
refrigerant flowing may be heard.
NOTE
Temperature adjustment during AUTO
■
Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
button or the
button.
AUTO mode operation procedure
■
Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
Air flow direction adjustment
procedure.
Page 9
1
When a change in temperature is desired.
Press the
or
button.
•
If you don’t want the AUTO mode program, change to
COOL, HEAT, DRY or FAN instead of AUTO.
Page 8
AUTO mode can be
operated by simply
pressing the ON/OFF
button.
To stop:
Press the ON/OFF button.
■
Each time the
button is pressed, the switch over occurs in the following order
–6
→
–5
→
............ –1
→
±0
→
+1 ............ +6.
When +6 is indicated, even if the
button is pressed, the indicator does not change.
■
Each time the
button is pressed, the switch over occurs in the following order
+6
→
+5
→
............ +1
→
±0
→
–1 ............ –6.
When –6 is indicated, even if the
button is pressed, the indicator does not change.
When the unit is not in AUTO mode:
Press MODE button.
Move the [
mark] to the
(Auto) position.
Aim the remote control at the air-conditioner.
Press the ON/OFF button.
1
2
When it is a little cold
Press the
button.
When it is a little hot
Press the
button.
Operation capacity by your choice
FAN SPEED
Set automatically by microcomputer
AUTO
Powerful operation with high capacity
HI
Standard operation
MED
Energy-saving operation
LO
About FAN SPEED
Press the FAN SPEED button.
Move the [
mark] to the desirable fan speed position.
■
You can choose the capacity of your air-conditioner when heating,
cooling or fan.
RWA012A246_En.p65
06.9.22, 7:33 PM
7
