– 10 –
AUTO
HI
MED
LO
NOTE
Temperature adjustment during AUTO
■
Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the button or the button.
During automatic operation, 24°C is preset both for heating and cooling.
AUTO mode operation
■
Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
1
When a change in temperature is required.
Press the or button.
•
If you do not want the AUTO mode program, change to
COOL, HEAT, DRY or FAN instead of AUTO.
Page 11
•
Air
fl
ow direction adjustment procedure.
Page 12
To stop:
Press the ON/OFF button.
■
Each time the button is pressed, the switch over occurs in the following order
–6
→
–5
→
............
–1
→
±0
→
+1
............
+6.
When +6 is indicated, even if the button is pressed, the indicator does not change.
■
Each time the button is pressed, the switch over occurs in the following order
+6
→
+5
→
............ +1
→
±0
→
–1 ............ –6.
When –6 is indicated, even if the button is pressed, the indicator does not change.
When the unit is not in AUTO mode:
Press MODE button.
Move the [ mark] to the (Auto) position.
Point the remote control toward the air-conditioner, and
Press the ON/OFF button.
1
2
When it is a little cold
Press the
button.
When it is a little hot
Press the button.
Operation capacity by your choice
FAN SPEED
Set automatically by microcomputer
AUTO
Powerful operation with high capacity
HI
Standard operation
MED
Energy-saving operation
LO
FAN SPEED
Press the FAN SPEED button.
Move the [ mark] to the preferred fan speed position.
■
You can choose the capacity of your air-conditioner
when heating mode, cooling mode or fan mode.
•
In case air is not blowing out during the operation.
Page 20
Display in OFF status
•
The current time and preset OPERA-
TION MODE are displayed while the
air-conditioner is turned off.
Remote Control display
-6 -5 -4 -3 -2
-1 +0 +1 +2 +3 +4 +5 +6
18 19 20 21 22
23 24 25 26 27 28 29 30
Setting
temp.(
°C
)
•
When changing FAN SPEED from HI to LO, the sound of
refrigerant
fl
owing may be heard.
NOTE
RLC012A012_EN_001-022.indd 10
RLC012A012_EN_001-022.indd 10
2016/07/14 18:19:23
2016/07/14 18:19:23
