– 13 –
■
If it is pressed while the unit is off
SLEEP TIMER operation starts with the previous operation settings, and the air-
conditioning is turned off after the set time elapses.
■
If it is pressed while the unit is running
The air-conditioner is turned off after the set time elapses.
Every time the button is pressed, the display changes as follows:
Example: You prefer it to stop after 7 hours.
Set to
The timer light (yellow) is on.
Ø
•
The unit stops after the set time lapses.
SLEEP TIMER operation
■
The unit stops automatically after the set time lapses.
The set temperature is automatically adjusted according to the elapsed time in order to avoid too much cooling or heating.
Page 15
Press the SLEEP button.
1
How to cancel
Press the CANCEL button to turn off the SLEEP
display.
Changing of set time
Set a new time by pressing SLEEP button.
•
Cannot be set at the same time with OFF-TIMER.
NOTE
OFF-TIMER operation
■
The unit stops automatically when the set time comes.
With the air-conditioner turned off, start the operation from Step 1. With the air-conditioner running, start from Step 2.
Example: You prefer it to stop 22:30.
Press the ON/OFF button.
Press the OFF TIMER button.
OFF TIMER display
is blinking.
Press the or button.
Every time the
button is pressed, the display is switched in the order of:
0:00
0:10
0:20
...
(Units of ten minutes)
1:00
1:10
Every time the button is pressed, the display is switched in the order of:
0:00 23:50 23:40
...
(Units of ten minutes)
23:00 22:50
Set at 22:30.
3
1
4
Press the OFF TIMER button.
The display changes from blinking to steady lighting and the setting is complete.
The timer light (yellow) is on.
2
How to cancel
Press the CANCEL button to turn off the timer
display.
•
The unit stops at the end of the set period of time.
•
Make sure to press the button within 60 seconds from the last operation in
step 3, otherwise the setting is not completed.
•
The current time is not displayed during OFF-TIMER operation.
•
Different from SLEEP TIMER operation, automatic set temperature adjust-
ment is not done during OFF-TIMER operation.
Changing of set time
Set a new time by using the OFF TIMER button.
NOTE
No indication
(canceled)
... (Units of one hour)
RLC012A012_EN_001-022.indd 13
RLC012A012_EN_001-022.indd 13
2016/07/14 18:19:24
2016/07/14 18:19:24
