background image

– 1 –

Thank you for purchasing a MITSUBISHI HEAVY INDUSTRIES THERMAL SYSTEMS, 
LTD. Air-Conditioner. To get the best long-lasting performance, please read and follow 
this User’s Manual carefully before using your air-conditioner. After reading, please store 
the Manual in a safe place and refer to it for operational questions or in the event of any 
irregularities.

This air-conditioner is intended for domestic use.

Do not vent R410A into the atmosphere: R410A is a 

fl

 uorinated greenhouse gas with 

a Global Warming Potential (GWP) = 2088.
Refer to a label on outdoor unit for the weight of 

fl

 uorinated greenhouse gas and CO

2

 

equivalent.

contents

ENGLISH

Your Air Conditioning product may be marked with this symbol. It means that 
waste electrical and electronic equipment (WEEE as in directive 2012/19/
EU) should not be mixed with general household waste. Air conditioners 
should be treated at an authorized treatment facility for re-use, recycling 
and recovery and not be disposed of in the municipal waste stream. Please 
contact the installer or local authority for more information.

This symbol printed in the batteries attached to your Air Conditioning 

product is information for end-users according to the EU directive 2006/66/

EC article 20 annex II.

Batteries, at their end-of-life, should be disposed of separately from general 

household waste. If a chemical symbol is printed beneath the symbol

shown above, this chemical symbol means that the batteries contain a 

heavy metal at a certain concentration. This will be indicated as follows:

Hg:mercury(0.0005%) , Cd:cadmium(0.002%) , Pb:lead(0.004%)

Please, dispose of batteries correctly at your local community waste 

collection or the recycling center.

Safety precautions ..........................................2
Name of each part and its function .................6
Remote control handling.................................8
Operation failure with the remote control........8
Temporary run operation ................................8
Operation and display section for remote 
control .............................................................9
Current time setting  .......................................9
AUTO mode operation ..................................10
Temperature adjustment during AUTO .........10
FAN SPEED .................................................10
COOL/HEAT/DRY/FAN mode operation ...... 11
Air-conditioner operable 
temperature setting....................................... 11
Characteristics of HEAT mode operation ..... 11
Air

fl

 ow direction adjustment..........................12

SLEEP TIMER operation ..............................13
OFF-TIMER operation ..................................13
ON-TIMER operation ....................................14
SLEEP TIMER + ON-TIMER operation ........14
PROGRAM TIMER operation  ......................15
HIGH POWER/ECONOMY operation ..........16
SELF CLEAN operation................................17
Auto restart function .....................................17
Tips for effective operation ...........................17
Maintenance .................................................18
Proper installation .........................................19
Troubleshooting  ...........................................20
Notice ...........................................................20
Contact your dealer ......................................21
About the Multiple Air-conditioner .................21
Self diagnosis function..................................22

The emission sound pressure level from each Indoor and Outdoor unit is under 70 dB(A).

RLC012A012_EN_001-022.indd   1

RLC012A012_EN_001-022.indd   1

2016/07/14   18:19:17

2016/07/14   18:19:17

Summary of Contents for SKM20ZSP-S

























Reviews: