– 12 –
ON-TIMER operation procedure
1
2
Changing of set time
Set a new time by using the ON-TIMER button.
Example: In the case you wish to bring the temperature to nearly set temperature in at 8:00.
Press the ON-TIMER button.
ON TIMER indicator
is blinking.
Releasing procedure
Press the CANCEL button to turn off the timer indicator.
3
■
Operation starts 5 to 60 minutes before the time that is set so that the room temperature reaches the optimum temperature at that time.
Page 13
ON-TIMER operation can be set regardless of whether the air-conditioner is running or not.
SLEEP ope ON-TIMER operation procedure
■
Combined timer operation of SLEEP operation and ON TIMER.
1-time event setting.
Example: When it is desired to stop after 3 hours and then start operation at 8:00, near
the set temperature.
■
SLEEP operation setting
Set by the procedures on page 11.
Set to
■
ON TIMER operation setting
Set by the above mentioned ON TIMER operation procedure.
Set to
The setting of the lighting of the timer light (yellow) of this unit is complete.
h
•
After the SLEEP operation set time has elapsed, the operation stops, and it
starts from 5 to 60 minutes before the ON TIMER’s time.
•
The timer light is not lit at the ON TIMER’s time.
Changing of set time
Set a new time by using the SLEEP or ON TIMER
button.
Releasing procedure
Press the CANCEL button to turn off the timer indicator.
Press the “
or
” button.
Each time the
button is pressed, the indicator is switched in the order of:
0:00
0:10
0:20
...
(Units of ten minutes)
1:00
1:10
Each time the
button is pressed, the indicator is switched in the order of:
0:00
23:50
23:40
...
(Units of ten minutes)
23:00
22:50
Set at 8:00.
Press the ON TIMER button.
The indication changes from blinking to steady lighting and the setting is complete.
The timer light (yellow) is on.
h
•
Operation starts 5 to 60 minutes before the set time.
•
The TIMER light goes out at the set time.
Press within
60 sec.!
Summary of Contents for SRK10YL-S
Page 25: ... 24 ...
