– 15 –
PROGRAM TIMER operation
■
The timer operations of the combination of ON and OFF-TIMER. Once this has been set the timer operations will be repeated at the
same time every day unless the ON/OFF button is pressed.
Example: Present time is 21:00. The air-conditoner running.
When it is prefered to stop at 22:30, and then start operation at 8:00,
near the set temperature.
1
OFF-TIMER operation setting
Set by the procedures on page 13. Set to
2
ON-TIMER operation setting
Set by the procedures on page 14. Set to
Timer light (yellow) on the unit will light when the setting is completed.
■
The set time will be displayed on the remote control. The display will
change depending on the operational status.
How to cancel
Press the CANCEL or ON/OFF button to turn off the timer dis-
play.
Changing of set time
Set a new time by using the OFF-TIMER or ON-TIMER button.
Comfort Start-up
In ON-TIMER operation, the unit starts the operation a little earlier, so
that the room can approach optimum temperature at ON time. This is
so called “Comfort start-up”.
•
Mechanism
The room temperature is
checked 60 minutes before the
ON time. Depending on the
temperature at that time, the
operation starts 5 to 60 minutes
before the timer is at ON.
•
The function is available for both
COOL and HEAT operation
mode (including AUTO). It does
not work for DRY mode.
SLEEP TIMER
In COOL operation
(Stop) Operation starts
▼
Check the room
temp. 60 mins.
before.
Set time
▼
When SLEEP TIMER is selected, the set temperature is automatically
adjusted after a while, ensuring that the room is not too cold during
cooling or too warm during heating.
•
During cooling : The preset temperature is lowered by 1°C at the
start of SLEEP operation (when the timer is set). After that, the tem-
perature goes up by 1°C every an hour to become 1°C higher than
the present temperature.
•
During heating: The preset temperature is lowered by 1°C at the
start of SLEEP operation (when the timer is set). After that the tem-
perature becomes 3°C lower in an hour and 6°C lower in two hours
than the present temperature.
(Operation)
Set temperature
First the air-conditioner starts running with ON-
TIMER.
After the air-conditioner stops running with OFF-TIMER.
First the air-conditioner stops running with OFF-
TIMER.
After the air-conditioner starts running with ON-TIMER.
•
The air-conditioner stopping.
•
The air-conditioner running.
RLC012A009_EN_001-022
2/12/15, 14:59
15
RLC012A018_01-22.indd 8
2016/09/05 14:32:43
