– 32 –
Contact your dealer
■
Turn off the power switch immediately and inform your dealer in any of the following situations:
The cable becomes extremely hot.
The covering of the cable is cracked.
When abnormalities occur, turn off the power source
immediately and turn it on after 3 minutes. Restart the
operation with ON/OFF button of the remote control and the
abnormalities still continue.
A switch does not activate properly.
A strange noise is heard during
operation.
The RUN and TIMER lights on the unit display section blink
quickly (0.5 seconds ON; 0.5 seconds OFF) or the lights do
not work.
About the multiple air-conditioners
Refrigerant (oil) recovery operation
• The air-conditioners cannot be in different operating modes at the same time, such as one unit being in the “Cool” mode and one
unit being in the “Heat” mode.
• When conducting different operations, the air-conditioner that was operated first will be given priority, so the air-conditioner that is
operated after that will conduct air blowing operation.
• When you want to give priority to the air-conditioner that was started later, either stop the air-conditioner that has priority or change
the operation type of the unit operated first to match that of the unit operated second.
• When other indoor units are operating in different modes, the RUN light illuminates.
• When the remote control operation switch is in the AUTO mode, the air-conditioner automatically selects either COOL or HEAT mode
when operation is started depending on the room temperature.
• During simultaneous operation of air-conditioners, operation modes may be automatically changed in response to the temperatures
of the individual rooms; this will result in the operation of the outdoor unit being stopped. In such a case, COOL or HEAT mode should
be used instead of AUTO mode. (This is only relevant when more than one air-conditioner unit is being used.)
• If the all of the indoor units are not operated at the same time for an extended period, the cooling or heating performance may
temporarily decrease. This is in order to control the recovery of the refrigerant (oil) in the stopped indoor unit(s). At this time, the
sound of refrigerant flowing may be heard from the stopped indoor unit(s).
The fuse or switch blows continuously.
The TV, radio or other equipment starts
to malfunction.
Simultaneous Operation
Automatic Operation
ON
OFF
0.5 seconds
0.5 seconds
RLF012A102A̲EN.indd 32
RLF012A102A̲EN.indd 32
2016/11/08 18:52:35
2016/11/08 18:52:35
