-
163
-
'17 • SCM-T-225
Control the flap by AIR FLOW
(UP/DOWN) button on the wireless remote control.
COOL , DRY, FAN
Remote control
display
HEAT
Approx. 60°
Approx. 44°
Approx. 50°
Approx. 32°
Approx. 38°
Approx. 21.5°
Approx. 5°
Approx. 21.5°
Approx. 12°
Approx. 12°
Angle of flap from horizontal
(Swing)
(Flap stopped)
(c) Memory flap (Flap stopped)
When you press the AIR FLOW button once while the flap is operating, it stops swinging at the position. Since this angle is
memorized in the microcomputer, the flap will automatically be set at this angle when
the next operation is started.
(b) Swing
(i)
Swing flap
Flap moves in upward and downward directions continuously.
Approx.60°
Approx.12°
Approx.44°
Approx.5°
In HEAT operation
In COOL, DRY, FAN operation
Approx. 45°
Approx. 75°
Approx.
5°
Approx. 60°
(a) AIR SELECTION button can switch between the combination of upper and lower air outlets and upper
air outlet. Not operable while the air-conditioner is OFF.
(i) Each time the AIR SELECTION button is pressed. The combination of the
upper and lower air outlets and the upper air outlet can be switched.
(ii) When the upper air outlet is selected, AIR OUTLET SELECTION light on
the unit display area will light green.
AIR OUTLET SELECTION
light : OFF
AIR OUTLET SELECTION
light : ON
Upper air outlet
Upper and lower air outlets
AIR SELECTION button
(9) Air outlet selection (SRF series only)
(8) Flap and louver control (SRF series only)
(a) Flap
Each time when you press the AIR FLOW
(UP/DOWN) button the mode changes as follows.
(d) When not operating
The flap returns to the position of air flow directly below, when operation has stopped.
