background image

EN-22 

Press the ON/OFF button.

Press the HI/ECO button.

x

  When the operating mode is AUTO, COOL or HEAT

Every time the HI/ECO button is pressed, the display is switched in the

order of:

No display

x

  When the operating mode is DRY or ON-TIMER + OFF-TIMER

Every time the HI/ECO button is pressed, the display is switched in the
order of:

No display

HIGH POWER/ECONOMY operation

2

1

(HIGH POWER)

(ECONOMY)

(Normal operation)

(ECONOMY)

(Normal operation)

HIGH POWER operation

Pressing the HI/ECO button intensi

¿

 es the operating power and initiates powerful cooling or heating operation for 15 minutes continu-

ously. The remote control 

 displays and the FAN SPEED display disappears.

x

During the HIGH POWER operation, the room temperature
is not controlled. When it causes an excessive cooling or
heating, press the HI/ECO button again to cancel the HIGH
POWER operation.

x

  HIGH POWER operation is not available during the DRY and 

ON-TIMER + OFF-TIMER operations.

x

  When HIGH POWER operation is set after setting ON-TIM-

ER operation, HIGH POWER operation will start from the set 
time.

x

  After HIGH POWER operation, the sound of refrigerant 

À

 ow-

ing may be heard.

x

  When the following operations are set, HIGH POWER opera-

tion will be canceled.

1

 When the HI/ECO button is pressed again.

(The operation mode will be changed to the ECONOMY 

operation.)

2

 When the operation mode is changed.

3

 When it has been 15 min. since HIGH POWER operation 

has started. 

4

 When the SILENT button is pressed.

5

 When the NIGHT SETBACK button is pressed.

x

  Not operable while the air-conditioner is OFF.

ECONOMY operation

Pressing the HI/ECO button initiates a soft operation with the power suppressed in order to avoid an excessive cooling or heating. 

The unit operates 1.5°C higher than the setting temperature during cooling or 2.5°C lower than that during heating. The remote 

control 

 displays and the FAN SPEED display disappears.

NOTE

x

It will go into ECONOMY operation at the next time the air-
conditioner runs in the following case. 

1

 When the air-conditioner is stopped by ON/OFF button during 

ECONOMY operation. 

2

 When the air-conditioner is stopped in SLEEP or OFF 

TIMER operation during ECONOMY operation. 

3

 When the operation is retrieved from CLEAN operation. 

x

When the following operations are set, ECONOMY operation
will be canceled.

1

 When the HI/ECO button is pressed again.

2

 When the operation mode is changed from DRY to FAN.

3

 When the NIGHT SETBACK button is pressed.

x

Not operable while the air-conditioner is OFF.

NOTE

RJJ012A005_EN.indd 22

1/18/2019   4:54:01 PM

Summary of Contents for SRR25Z6-W

































Reviews: