Mitsubishi Heavy Industries SRR25ZS-W User Manual Download

Page: 13 / 32

EN-11

Transmission procedure

When each button on the remote control is pressed with the remote control pointing towards the unit
display section, a signal is transmitted.
When the air-conditioner receives the signal correctly, it will beep.

OPERATION MODE select button

Each time the button is pressed, the
mode changes.

Page 12,14

•

The above illustration shows all controls, but in

practice only the relevant parts are shown.

ON/OFF (luminous) button

Press to start operation, press again
to stop.

TEMPERATURE button

This button sets the room temperature.

AIR FLOW (UP/DOWN) button

This button changes the air

ow (up/

down) direction.
This button is not used.
(Air

ow direction adjustment can not be

performed.)

Page 13

TIME SET UP switch

This switch is for setting the time.

Page 12

SLEEP button

This button selects SLEEP operation.

Page 15

Display in OFF status

The current time, day of the week, and present OPERATING MODE are displayed while the air-conditioner is turned off.

CLEAN switch

This switch selects the CLEAN
operation.

Page 24

ON TIMER button

This button selects ON TIMER operation.

Page 16

TIMER button

This buttions is used for setting the
current time and timer function.

ACL switch

Switch for resetting microcomputer.

Page 9

PROGRAM button

This button sets WEEKLY TIMER.

Page 18

HI/ECO button

This button changes the HIGH POWER/
ECONOMY operation.

Page 22

SILENT button

This buttion changes the SILENT
operation.

Page 23

OFF TIMER button

This button selects OFF TIMER
operation.

Page 15

WEEKLY button

This button switches the WEEKLY
TIMER to ON/OFF.

Page 18

FAN SPEED button

Each time the button is pressed, the fan
speed changes.

Page 13

NIGHT SETBACK button

This button sets NIGHT SETBACK
operation.

Page 23

SET/Child Lock button

Use this button to set the timer and
Child Lock.

Page 10

CANCEL button

This button cancels the ON timer, OFF
timer, and SLEEP operation.

Transmission section

[View with the cover opened]

Operation and display section for remote control

Reception

pip

RJJ012A005_EN.indd 11

1/18/2019 4:54:00 PM

Summary of Contents for SRR25ZS-W

































Search results

Summary of Contents for SRR25ZS-W

Reviews:

Related manuals for SRR25ZS-W

Brands by name

Popular brands

Mitsubishi Heavy Industries SRR25ZS-W, User Manual

Search results

Summary of Contents for SRR25ZS-W

Reviews:

Related manuals for SRR25ZS-W

Brands by name

Popular brands