– 8 –
Aim the remote control at the air-conditioner.
Press the ON/OFF button.
When the unit is not in AUTO mode:
Press MODE button.
Move the [
mark] to the
(Auto) position.
Temperature adjustment during AUTO
Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
button or the
button.
1
AUTO mode operation procedure
■
Automatically selects the operation mode (HEAT, DRY, COOL) depending on the room temperature when switched on.
2
NOTE
WARM
Press the
button.
COOL
Press the
button.
1
When a change in temperature is desired.
Press the
or
button.
•
If you don’t want the AUTO mode program, change to
HEAT, DRY or COOL instead of AUTO.
Page 9
AUTO mode can be
operated by simply
pressing the ON/OFF
button.
To stop:
Press the ON/OFF button.
■
Each time the
button is pushed, the switch over occurs in the following order –6
→
–5
→
............ –1
→
±0
→
+1 ............ +6.
When +6 is indicatored, even if the
button is pushed, the indicator does not change.
■
Each time the
button is pushed, the switch over occurs in the following order +6
→
+5
→
............ +1
→
±0
→
–1 ............ –6.
When –6 is indicatored, even if the
button is pushed, the indicator does not change.
•
Air is not blown out during the op-
eration.
Page 17
•
Simultaneous automatic operation.
Page 16
RJD012A110_Eng
10/27/05, 1:15 PM
8
Black
