– 4 –
Features
Page 10
Page 11,12
There are two timers, for ON and OFF.
They can be set as desired.
Page 12
When using the timer to switch on, the sys-
tem become operational shortly before the
set time, depending on the room tempera-
ture so that the desired temperature is
reached at the set time.
Choice of operations and features
Amenity facility
TIMER procedure
•
AIR SCROLL
This function sets the unit at the most suitable angle
for blowing, imitating a natural breeze.
•
MEMORY FLAP
Once the flap position has been set, the unit will
memorise it and continue in the same position the
next time.
Page 8
Automatic selection of operating mode.
The Auto mode automati-
cally selects the operation
mode (HEAT, COOL or
DRY), depending on the
room temperature when
switched on.
Adjustment of
airflow
AUTO
Page 9
Cooling by extracting heat from the room.
COOL
Choice of operations
Page 9
The unit draws in heat from the outside air, transfers it inside and
heats the room.
HEAT
Page 9
Drying by extracting damp from the room.
Functioning of microcomputer depends on setting and room tem-
peratures. It dehumidifies while keeping room temperature almost
constant.
DRY
Page 9
Turning up the power operates the air-condi-
tioner in the power cooling and heating
mode.
HIGH POWER mode
Page 9
This is an economic and healthy level of op-
eration.
ECONOMY mode
RJH012A011_Eng
10/19/05, 1:46 PM
4
Black
