Mitsubishi Heavy Industries V Multi 100VNX Technical Manual Download

Page: 67 / 592

'13 • PAC-T-197

Model

Item

FDUM100VNXVF1

Indoor unit

FDUM100VF1

Outdoor unit

FDC100VNX

Power source

1 Phase 220-240V 50Hz / 220V 60Hz

Operation
data

Nominal cooling capacity (range)

10.0 [ 4.0(Min.)~ 11.2(Max.)]

Nominal heating capacity (range)

11.2 [ 4.0(Min.)~ 12.5(Max.)]

Power
consumption

Cooling

2.68

Heating

3.02

Max power consumption

4.83

Running
current

Cooling

12.0 / 12.5

Heating

13.5 / 14.1

Inrush current, max current

5 , 24

Power factor

Cooling

Heating

EER

Cooling

3.73

COP

Heating

3.71

Sound power level

Cooling

dB(A)

Heating

Sound pressure level

Cooling

P-Hi : 44 Hi : 38 Me : 36 Lo : 30

Heating

Silent mode sound pressure level

—

Exterior dimensions (Height x Width x Depth)

280 × 1370 × 740

1300×970×370

Exterior appearance
( Munsell color )

—

Stucco White

( 4.2Y7.5/1.1 ) near equivalent

Net weight

105

Compressor type & Q'ty

—

RMT5134MDE2×1

Compressor motor (Starting method)

—

Direct line start

Refrigerant oil (Amount, type)

—

0.9 M-MA68

Refrigerant (Type, amount, pre-charge length)

R410A 4.5kg in outdoor unit (incl. the amount for the piping of : 30m)

Heat exchanger

Louver fin & inner grooved tubing

M shape fin & inner grooved tubing

Refrigerant control

Electronic expansion valve

Fan type & Q'ty

Centrifugal fan ×3

Propeller fan ×2

Fan motor (Starting method)

100 + 130 < Direct line start >

86 x 2 < Direct line start >

Air flow

Cooling

/min

P-Hi : 36 Hi : 28 Me : 25 Lo : 19

100

Heating

Available external static pressure

Standard : 60 Max : 100

—

Outside air intake

Possible

—

Air filter, Quality / Quantity

Procure locally

—

Shock & vibration absorber

Rubber sleeve(for fan motor)

Rubber sleeve(for compressor )

Electric heater

—

20 (Crank case heater)

Operation
control

Remote control

(option) wired : RC-EX1A , RC-E5 , RCH-E3 wireless : RCN-KIT3-E

Room temperature control

Thermostat by electronics

Operation display

—

Safety equipments

Overload protection for fan motor.

Frost protection thermostat.

Internal thermostat for fan motor.

Abnormal discharge temperature protection.

Installation
data

Refrigerant piping size ( O.D. )

Liquid line: I.U.

9.52 (3/8") Pipe

9.52 (3/8")x0.8 O.U.

9.52 (3/8")

Gas line:

15.88 (5/8")

15.88 (5/8")x1.0

15.88 (5/8")

Connecting method

Flare piping

Attached length of piping

—

Insulation for piping

Necessary (both Liquid & Gas lines)

Refrigerant line (one way) length

Max.100m

Vertical height diff. between O.U. and I.U.

Max.30m (Outdoor unit is higher)

Max.15m (Outdoor unit is lower)

Drain hose

Hose Connectable with VP25(O.D.32)

Holes size

20 x 3pcs

Drain pump, max lift height

Built-in Drain pump , 600

—

Recommended breaker size

—

L.R.A. (Locked rotor ampere)

5.0

Interconnecting wires

Size x Core number

1.6mm x 3 cores (Including earth cable) / Termainal block (Screw fixing type)

IP number

IPX0

IP24

Standard accessories

Mounting kit, Drain hose

Edging

Option parts

UM-FL3EF

(2) This air-conditioner is manufactured and tested in conformity with the ISO.
(3) Sound level indicates the value in an anechoic chamber. During operation these value are somewhat
higher due to ambient conditions.
(4) Select the breaker size according to the own national standard.
(5) When wireless remote control is used, fan is 3 speed setting (Hi-Me-Lo) only.
(6) The operation data indicate when the air-conditioner is operated at 230V50Hz or 220V60Hz.
(7) Static pressure of optional air filter "UM-FL1EF" is 5Pa initially.
(8) The external static pressure setting can be changed to 10-100Pa. (For RC-EX1A and RC-E5 only)

Note (1) The data are measured at the following conditions.

Item

Operation

Indoor air temperature

Outdoor air temperature

External static pressure

of indoor unit

Standards

Cooling

27˚C

19˚C

35˚C