background image

Adaptive Cruise Control System (ACC)*

Starting and driving

6-81

6

When the ACC system determines that its
performance has been degraded, a buzzer will
sound and a message will be displayed in the
instrument cluster.

For example: The brake system is overheat-
ing due to continuous brake control on long
downhill slope.

If the display keeps showing the message,
there is a possibility that the ACC has a mal-
function. contact an authorised MITSUBISHI
MOTORS dealer.

In adverse weather conditions, such as
rain, snow or sand storms, etc.

Foreign objects, such as dirt, snow or ice,
adhere to the surface of the sensor.

A front vehicle or an oncoming vehicle is
splashing water, snow or dirt.

Driving on a nonbusy road with a few
vehicles and obstacles in front.

When the ACC system detects an abnormal-
ity in the system, the ACC system will be
turned off, a buzzer will sound and a message
will be displayed in the instrument cluster. If
the message remains after the operation mode
has been turned to the “OFF” position and
then turned back to the “ON” position, con-
tact an authorised MITSUBISHI MOTORS
dealer.

Press the “ACC ON/OFF” switch when the
ACC is in the ‘ON state’ to turn off the ACC.

NOTE

The ACC control will also be cancelled
when shifting the drive mode-selector of
Super Select 4WD II.

To turn off ACC

NOTE

Pressing the switch turns off the ACC even if
it is engaged.

The set speed is cancelled when the ACC is
turned off or the operation mode is set to
“OFF”.

Type 1

Type 2

Summary of Contents for PAJERO SPORT

































































































































































































































































































































































































































Reviews: