Adaptive Cruise Control System (ACC)*
6-82
Starting and driving
6
E00638300180
After cancelling the ACC control (i.e. placing
the system in the ‘standby state’) by pressing
the “CANCEL” switch or depressing the
brake pedal, you can resume the ACC control
at the originally set speed if you push up the
“RES +” switch.
E00638400149
Every time you press the following distance
setting switch, the setting changes sequen-
tially through three options “Long”, “Middle”
and “Short”, cycling back to “Long” after
“Short”. Even after turning off the ACC or
setting the operation mode to “OFF”, the sys-
tem retains your last selected the distance set-
ting in memory.
If the ACC is in the ‘ON state’ when the
operation mode is set to “OFF”, the system is
set to the ‘OFF state’ when the operation
mode is set to “ON” next time.
To resume the control
NOTE
Type 1
NOTE
The conditions to be met before the ACC
control can be resumed are the same as those
for starting the ACC control.
To change the following distance
setting
Type 2
NOTE
The following distance varies as a function
of the speed; the faster the set speed, the
longer the following distance.
Type 1
Type 2