Dual-zone automatic climate control air conditioning
For pleasant driving
7-9
7
E00773600136
When the SYNC indicator (A) goes off by
turning the passenger’s side temperature con-
trol dial (B) clockwise or anticlockwise or
pressing the SYNC switch, the driver’s side
and the passenger’s side temperature can be
controlled independently.
E00774100239
Press the switch to turn the air conditioning
on, the indicator lamp (A) comes on.
Press the switch again to switch it off.
NOTE
The temperature value of air conditioning is
switched in conjunction with outside temper-
ature display unit of the instrument cluster.
On vehicles equipped with Instruments -
Type A, refer to “Changing the temperature
unit” on page 5-15.
On vehicles equipped with Instruments -
Type B, refer to “Changing the fuel con-
sumption display unit and the temperature
unit” on page 5-40.
While the engine coolant temperature is low,
the temperature of air flowing will not be
changed, even if you have selected warm air
with the switch.
To prevent the windscreen and windows
from fogging up, the mode selection will be
changed to “
” and the blower speed will
be reduced while the system is operating in
the AUTO mode.
When the temperature is set to the highest or
the lowest, the air selection and the air condi-
tioning will be automatically changed as fol-
lows.
Also, if the air selection is operated manually
after an automatic changeover, manual oper-
ation will be selected.
• When the temperature is set to the highest
setting (32.0°C)
Outside air will be introduced and the air
conditioning will stop.
• When the temperature is set to the lowest
setting (18.0°C)
Inside air will be recirculated and the air
conditioning will operate.
The settings described above are the factory
settings.
The air selection and air conditioning
switches can be customised (function setting
changed), and the automatic switching of
outside air and the air conditioning accord-
ing to operating conditions can be changed
as desired.
For further information, we recommend you
to consult an authorised MITSUBISHI
MOTORS dealer.
Refer to “Customising the air conditioning
switch” on page 7-11.
Refer to “Customising the air selection” on
page 7-12.
To control the driver’s side and
the passenger’s side tempera-
ture independently
NOTE
NOTE
When the indicator (A) comes on by pressing
the SYNC switch, the passenger’s side tem-
perature will be controlled to the same set-
ting temperature as the driver’s side.
When the indicator (A) is shown in the dis-
play, if the driver’s side temperature control
dial is turned clockwise or anticlockwise, the
passenger’s side setting temperature will be
synchronized to the driver’s side.
Switching the air conditioning
system ON/OFF