Security alarm system
3-30
Locking and unlocking
3
It is possible to cancel the system activation
during the system preparation mode or the
system armed mode.
In addition, it is possible to cancel the alarm
once it has been activated.
Refer to “Cancelling the system” on page
3-31, “Cancelling the alarm” on page 3-32.
E00301702578
Follow the procedure below to set the system
to the system armed mode.
1. Put the operation mode in OFF.
2. Exit the vehicle and close all of the doors
and tailgate.
3. Press the LOCK switch (A) on the key,
the driver’s or front passenger’s door
lock/unlock switch (B), the tailgate
LOCK switch (C) or use the close and
lock function in order to lock all the doors
and the tailgate.
By locking the vehicle using the keyless
entry system, the keyless operation func-
tion or the close and lock function, the
system preparation mode is activated.
The buzzer makes an intermittent beeping
sound and the security indicator lamp in
the instrument cluster flashes for confir-
mation.
NOTE
The alarm will resume if unlawful actions
are taken again, even if the alarm has
stopped.
System cancellation
NOTE
When lending the vehicle to another person
or allowing the vehicle to be driven by some-
one who is unfamiliar with the security alarm
system, be sure to give the person a proper
explanation of the security alarm system.
If a person who is unfamiliar with the secu-
rity alarm system accidentally unlocked the
vehicle, causing the alarm to sound, the
alarm would be a nuisance to people nearby.
Setting the system
Driver’s and front passenger’s door lock/unlock
switches
Tailgate LOCK switch (except for vehicles
equipped with the electric tailgate)
Tailgate LOCK switch (vehicles equipped with
the electric tailgate)