manualshive.com logo in svg

Mitsubishi 2015 OUTLANDER SPORT/RVR, Owner'S Manual

The Mitsubishi 2015 OUTLANDER SPORT/RVR is a versatile and reliable vehicle, perfect for adventurous individuals. Ensure you have all the necessary information at your fingertips with the comprehensive Owner's Manual available for download, absolutely free, from 88.208.23.73:8080. Explore the capabilities of your OUTLANDER SPORT/RVR with this user-friendly manual!

Share
Download
background image

5

Features and controls

Break-in recommendations ..............................................................5-3
Keys .................................................................................................5-3
Electronic immobilizer (Anti-theft starting system) ........................5-4
Keyless entry system (if so equipped)  .............................................5-7
Free-hand Advanced Security Transmitter (F.A.S.T.-key)

  (if so equipped) .........................................................................5-11

Door locks ......................................................................................5-28
Power door locks  ...........................................................................5-30
Child safety locks for rear door  .....................................................5-31
Liftgate ...........................................................................................5-32
Inside liftgate release .....................................................................5-33
Theft-alarm system  ........................................................................5-33
Power window control ...................................................................5-36
Sunshade  (if so equipped)..............................................................5-39
Parking brake  .................................................................................5-40
Steering wheel height and reach adjustment ..................................5-41
Inside rearview mirror ...................................................................5-41
Outside rearview mirrors ...............................................................5-43
Ignition switch  ...............................................................................5-44
Starting the engine  .........................................................................5-45
Manual transaxle  (if so equipped) .................................................5-47
Continuously variable transmission (CVT)  (if so equipped).........5-49
Electronically controlled 4WD system  (if so equipped)................5-56
4-wheel drive operation  .................................................................5-58
Inspection and maintenance following rough road operation ........5-61
Cautions on the handling of 4-wheel drive vehicles ......................5-61
Service brake  .................................................................................5-62
Hill start assist ................................................................................5-63

Brake assist system ........................................................................5-64
Anti-lock braking system ..............................................................5-65
Electric power steering system (EPS)  ...........................................5-67
Active stability control (ASC) .......................................................5-68
Cruise control (if so equipped) ......................................................5-71
Tire pressure monitoring system  ...................................................5-75
Rear-view camera (if so equipped) ................................................5-79
Instrument cluster  ..........................................................................5-81
Multi-information display .............................................................5-83
Indicator light, warning light, and 

information screen display list .................................................5-105

Indicators ..................................................................................... 5-117
Warning lights .............................................................................. 5-118
Information screen display .......................................................... 5-119
Combination headlights and dimmer switch  ...............................5-121
Headlight leveling switch  (if so equipped)..................................5-127
Turn signal lever ..........................................................................5-127
Hazard warning flasher switch ....................................................5-128
Front fog light switch  (if so equipped) ........................................5-128
Wiper and washer switch .............................................................5-129
Electric rear window defogger switch .........................................5-134
Horn switch  .................................................................................5-134
Link System  (if so equipped) ......................................................5-135
Bluetooth

®

 2.0 interface (if so equipped) ....................................5-135

USB input terminal  (if so equipped) ...........................................5-157
Sun visors  ....................................................................................5-159
12 V power outlets .......................................................................5-160
Interior lights  ...............................................................................5-161

BK0206700US.book  1 ページ  ２０１４年３月２５日　火曜日　午後４時４２分

Summary of Contents for 2015 OUTLANDER SPORT/RVR

































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 OUTLANDER SPORT/RVR

AA Products X31 Instruction Manual preview
X31
Brand: AA Products Pages: 6
Eaton Green Motion DC 22 Training preview
Green Motion DC 22
Brand: Eaton Pages: 65
Harmar Mobility AL001 Installation And Owner'S Manual preview
AL001
Brand: Harmar Mobility Pages: 10
Code 3 WingMan Installation & Operation Manual preview
WingMan
Brand: Code 3 Pages: 8
Safe Fleet RVS-218627 Instruction Manual preview
RVS-218627
Brand: Safe Fleet Pages: 38
Mazda 2008 MX-5 Miata Manual preview
2008 MX-5 Miata
Brand: Mazda Pages: 400
CARRYBOY CB-796IG2-CIGD-R Installation Manual preview
CB-796IG2-CIGD-R
Brand: CARRYBOY Pages: 4
GMC 2012 Terrain Owner'S Manual preview
2012 Terrain
Brand: GMC Pages: 428
Cadillac 2007 CTS Owner'S Manual preview
2007 CTS
Brand: Cadillac Pages: 518
Opel OPEL INSIGNIA Infotainment Manual preview
OPEL INSIGNIA
Brand: Opel Pages: 141
Globalsat MR-350P Installation Manual preview
MR-350P
Brand: Globalsat Pages: 2
VDO DLD Wide Range II Installation Instructions Manual preview
DLD Wide Range II
Brand: VDO Pages: 84
Wagan TravelCharge Companion GO-Plus User Manual preview
TravelCharge Companion GO-Plus
Brand: Wagan Pages: 3
Harbor Freight Tools 66242 User Manual preview
66242
Brand: Harbor Freight Tools Pages: 12
Honda 0SR95-HL4-211A Installation Instructions preview
0SR95-HL4-211A
Brand: Honda Pages: 3
Cadillac 1999 DeVille Owner'S Manual preview
1999 DeVille
Brand: Cadillac Pages: 368
Luverne 205760 Installation Instructions preview
205760
Brand: Luverne Pages: 3
Navman B2+ User Manual preview
B2+
Brand: Navman Pages: 27

Brands by name

Popular brands

Load more brands