![background image](http://html1.mh-extra.com/html/mitsubishi/diesel-engines/diesel-engines_service-manual_1809101114.webp)
FUEL SYSTEM - DISASSEMBLY, INSPECTION AND REASSEMBLY
3 - 23
5. Fuel
Filter
5.1
Disassembling, inspecting and
reassembling the fuel filter (with a
selector cock)
(1)
Normally, only remove the filter element. Do not
disassemble the cock lever unless so required.
(2)
If the cock lever is disassembled, clean it and
apply silicon oil to the O-ring before reassembly.
5.2 Inspecting the fuel filter (cartridge type)
If water or sediment is accumulated on the
bottom of the case or in the filter element, replace
the entire assembly. Replace the fuel filter
assembly approx. every 500 hours. However, it
is recommended that the fuel filter be checked
every 100 hours and, if faulty, replace at that
time.
Disassembling, inspecting and reassembling
the fuel filter
①
Ring nut
②
Cup
③
O-ring
④
Element
⑤
O-ring
⑥
Cock lever
⑦
O-ring
⑧
Spring
⑨
Valve
⑩
Filter body
Inspecting the fuel filter
Air bleed plug
Wash in light oil:
every 100 hours
Replace:
every 500 hours
Check for accumulation of water or sediment
Do not remove.
Replace: O-rings (
,
and
)
Inspect: every 100 hours
Replace: every 500 hours
Replace the entire assembly
if water/sediment is
accumulated inside.
Summary of Contents for diesel engines
