![background image](http://html1.mh-extra.com/html/mitsubishi/diesel-engines/diesel-engines_service-manual_1809101146.webp)
COOLING SYSTEM - INSTALLATION
5 - 11
2. Thermostat
and
Thermoswitch
Tightening torque:
39.2 to 49.0 N m
(4.0 to 5.0 kgf m)
[28.9 to 36.2 lbf ft]
Tightening torque:
18.6 to 26.5 N m
(1.9 to 2.7 kgf m)
[ 13.7 to 19.5 lbf ft]
Installation of the thermostat and thermoswitch
<Installation sequence>
④→③→②→①
2.1 Installing the thermostat case
(1)
Assemble the thermostat into the thermostat case.
(2)
Using a new gasket, install the thermostat
assembly onto the cylinder head.
2.2 Installing the thermoswitch
Apply sealant to the threaded portion of the
switch, and tighten it to the specified torque.
Sealant ThreeBond
1104
Installing the thermostat assembly
Installing the thermoswitch
Case bolt tightening torque:
39.2 to 49.0 N m
(4.0 to 5.0 kgf m)
[28.9 to 36.2 lbf ft]
Cover bolt tightening
torque:
16 to 20 N m
(1.6 to 2.0 kgf m)
[11.6 to 14.5 lbf ft]
Apply sealant
Tightening torque:
18.6 to 26.5 N m
(1.9 to 2.7 kgf m)
[13.7 to 19.5 lbf ft]
Summary of Contents for diesel engines
