background image

EN-52

 Client Access License ( CAL)

An application allowing multiple users to share 
a single operation system requires the standard 
Microsoft Windows server licenses. In addition to 
Windows Server Client Access License, Remote 
Desktop Services Client Access License (RDS CAL) is 
necessary for each end user or each device to access 
Windows server. When using Windows Multipoint 
Server, Windows MultiPoint Server 2011 CAL is also 
necessary. For details of Microsoft multiple user 
licenses, see the Microsoft website.

1. When the host computer OS is Windows XP, 

Windows Vista or Windows 7

For Windows XP, Windows Vista and Windows 7, only 
a single projector can run the thin client function. While 
using the desktop of host computer, you cannot use 
the thin client function on the projector.

2. When the host computer OS is Windows Server 

2008 R2

Windows Server requests Client Access License 
(CAL). To access the host computer from a thin 
client computer or projector, two types of CAL are 
necessary: “Windows Server CAL” and “Windows 
Remote Desktop Service (RDS) CAL”. “Windows 
Server CAL” offers two types of license system.

User CAL 

With User CAL, you purchase CALs according to the 
number of users regardless of the number of thin 
client computers or projectors. User CAL is, therefore, 
recommended in the case that the number of system 
administrators or operators who operate thin client 
computers or projectors at multiple sites is smaller 
than that of the thin client computers or projectors.

E.g., when two users operate four devices

In the example above, the following licenses are 
necessary.
•  Windows Server CAL (User CAL) x 2
•  Windows RDS CAL x 2

Device CAL

With Device CAL, you purchase CALs according to the 
number of devices accessing to the host, regardless 
of the number of users who access the host via thin 
client computer or projector. Therefore Device CAL 
is recommended for the case that multiple operators 
share a thin client computer or projector.

E.g., when six users operate four devices

In the example above, the following licenses are 
necessary.
•  Windows Server CAL (Device CAL) x 4
•  Windows RDS CAL x 4

3. When the host computer OS is Windows 

MultiPoint Server

The concept of Windows MultiPoint Server is basically 
the same as that of Windows Server 2008 R2. It 
requires Windows MultiPoint Server CAL instead of 
Windows RDS CAL. Therefore, Windows Server CAL 
and Windows MultiPoint Server CAL are necessary 
for each user or device. When you use the desktop of 
host computer as one of computer terminals, Windows 
MultiPoint Server will also request a Windows Server 
CAL and Windows MultiPoint Server CAL for the 
desktop of host computer.

(Example 1)

When two users operate four computers or projectors 
as well as the desktop of host computer
•  Windows Server CAL (User CAL) x 2
•  Windows MultiPoint Server CAL x 2

(Example 2)

When six users operate four computers or projectors 
as well as the desktop of host computer
•  Windows Server CAL (Device CAL) x 4
•  Windows MultiPoint Server CAL x 4

Advanced display utilities (continued)

Summary of Contents for DLP NW31U-EST












































































Reviews: