17/100
•
System Log List button
When you want to look through the logged data of a recorder stored in the system log list,
select the recorder from the list, and then click this button. The System Log List panel will be
opened.
For a detailed description of the system log list, refer to Sec. 4.6.
3.2.4
Filter Settings button
The Filter Settings button is at the lower right side of the Main View screen. Use this button to
set various filters.
When the Filter Settings button is clicked, the panel shown in the following figure will be
opened, and you can set the filter data for the recorder list, etc. To set the filter data for the
event list, download data list, or copy data list, click the corresponding tab to switch the list.
Enter a check in the check box of the desired item to use the filter function.
Description of setting:
If the filter is set in this way, the registered recorder names will be
filtered to select the recorder names having the word “LABO”.
