36/100
4.2.2
Alarm List Search tab
Use this tab to search the alarm list for the desired alarm image of the recorder.
Click the Update button
to obtain the latest alarm list from the recorder. Some
recorders enable specification of the list obtainment range, camera channel, total number of
alarms to be obtained, etc.
The obtained alarm list will be displayed using the alarm distribution bar and the list display
area at the lower section of the panel.
The alarm distribution bar uses thin lines to indicate the alarm record existing date and time.
Move the mouse pointer to one of these thin lines. The alarm information, such as the alarm
number, on the thin line will appear. Click the fine line to carry out search.
On the alarm distribution bar, if you click the right button of the mouse, a control will appear.
Using the control, you can enlarge or contract the alarm distribution bar. Use this function if a
lot of thin lines are put together at one point and it is difficult to identify each line.
Select an alarm and then click the Search button on the right side to search the alarm list for
the specified alarm image. Or double click an alarm to search the alarm list for the specified
alarm image.
Use the Store List button (the button at the lowermost position on the right side) to store the
alarm list in the format of a text file.
