66/100
4.10.4.
Starting alarm recording manually <NET alarm recording function>
You can start alarm recording by clicking the button if you find an important scene to be
alarm-recorded during live image viewing.
In this case, the alarm recording duration set in the recorder is applied.
You can select to display or hide this button using the Camera Window tab on the Option window
(refer to Sec. 4.7.3). When this button is hidden, the response to the screen operation gets slightly
faster.
Notice
This button is effective only to the recorders supporting the NET alarm recording function, such as
DX-TL5000 series.
4.10.5.
Controlling the PTZ camera <PTZ control function>
With a click on the PTZ control panel button of the Camera Window panel (refer to Sec.
3.6), the PTZ control panel opens. Function of each button is shown in the figure below.
When you use the
joy stick, attach a
check.
Column to display information
Joystick and
pre-set key
These are the User-Function
buttons. Use these buttons by
allocating special applications such
as a wiper and light which are
installed only in a luxury model.
See the detailed description below.
When you drag within the image field, the
camera turns toward that direction. As it
gets away from the drag stating point, speed
changes in 3 steps.
Auto-pan operation
area
