26
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
<MPX DISPLAY SETTINGS>
The multiplexer function of this unit allows the connected
camera video to be displayed using SPLIT4 and SPLIT9
screens. It is also possible to set the order of the camera
number displayed. Basic operations of the multiplexer can
also be found on
see page 10.
■
Multiplexer function related button
operations/operation table
♦
Camera number button operations
When pressing a camera number button, the video of the
camera connected to that camera number terminal is dis-
played using a single screen. Even during split/sequential
screen display, video from any camera can be displayed
using a single screen by pressing the respective camera
number button.
♦
SPLIT/SEQUENCE button operations
By pressing the SPLIT/SEQUENCE button, the display
modes shown below set in each split screen setting of the
multiplexer setting can be displayed in order.
Available modes
“SPLIT9”, “SPLIT4(a)”, “SPLIT(b)”, “SPLIT(c)”,
“SPLIT4 sequential”, “SPLIT9 sequential”
During playback, only the underlined displayed
modes can be selected.
Single screen sequential playback is possible
by setting “SEQUENTIAL PLAY” in the <HDD SET-
TINGS> to “ON”.
The split screen setting can be set using “SPLIT4
SCREEN SETTING” or “SPLIT9 SCREEN SET-
TING” in the <MPX DISPLAY SETTINGS> screen.
The update speed of camera video becomes
slower as the quantity of camera increases. For
smoother video playback, remove unnecessary
cameras by setting “PPS” or “A-PPS” in the <REC
ORD SETTING> screen to “- - - - -”.
To return the screen to single screen display
Pressing a camera number button (1 ~ 9) cancels the split/
sequential display and returns to the single screen display
of the pressed camera number button. Pressing the SPLIT/
SEQUENCE button again returns the screen to the split/
sequential display previous to canceling.
！
When a menu screen and split/sequential display
are displayed simultaneously, the single screen dis-
play will not appear even when pressing a camera
number button. In this case, clear the menu screen
and then press a camera number button (1 ~ 9).
♦
ZOOM button operations
By pressing the ZOOM button in single screen display, the
displayed video can be viewed at 100%, 200% or 400%
magnification.
！
The magnification display function can only be
set when in the single screen mode. The screen can
be moved vertically and horizontally with the mag-
nification center point (X) as the axis by pressing
the MOVE buttons.
1. Press the ZOOM button during single screen display.
• “100%” appears on the top left the single screen display
and the magnification center point (X) appears at the center
of the screen.
X1
X
2. To shift the screen vertically or horizontally, press the , ,
and
buttons.
The position of the magnification center point is
stored even when the display screen is switched or
the power is turned off. This is convenient when the
point to magnify is determined in advance.
3. Press the ZOOM button.
• Pressing the button each time switches the magnification
in order of 200%, 400%, normal and 100%.
X2
X4
The magnification function can also be used dur-
ing playback or recorded contents.
INFORMATION
A back screen may appear when pausing recorded
video of multiple cameras in the single screen dis-
play mode and magnifying. In this case, display the
magnified screen by turning the JOG dial and for-
warding a frame.
INFORMATION
The magnification display function of this unit uses
digital magnification and screen details may appear
pixelized when magnifying.
