49
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
ENGLISH
<HDD SETTINGS>
>>HDD REPEAT REC STANDBY
HDD REPEAT PLAY OFF
IM-CHECK PLAY OFF
SEQUENTIAL PLAY OFF
If not overwriting data on the first unit (when the
remaining capacity becomes less than 20%), set
“HDD REPEAT REC” of the first unit to “OFF”.
2. Press the SET UP button
}
<SETTINGS>
}
<INITIAL SET
UP/INFORMATION>
}
Select “MODE OUT 1” ~ “MODE OUT
4” ( 2 ) in the <REAR TERMINAL SETTINGS> screen.
Display the “REMAIN” and confirm.
• 2 : Set the number of the connected MODE OUT terminal.
When not overwriting data on the first unit, this
setting is not required for the second unit.
3. Display “HDD-20%” in “REMAIN HDD” of the same screen
and confirm.
<REAR TERMINAL SETTINGS>
MODE OUT 1 REMAIN
MODE OUT 2 REMAIN
MODE OUT 3 REMAIN
MODE OUT 4 REMAIN
KEY SOUND ON
BUZZER REMAIN
>>REMAIN HDD HDD-20
%
CALL OUT SETTINGS
EMERGENCY REC DURATION 10M
If not overwriting data on the first unit (when the
remaining capacity becomes less than 20%), this
setting is not required for the second unit.
4. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
♦
Setting example for series recording 2
Setting for operating the second unit as shown below.
• When the remaining capacity of the first unit becomes
less than 20% or an error occurs during HDD recording
}
}
}
}
}
Automatically start recording to the HDD of the
second unit
CLOCK ADJ
REC
EMERGENCY
RESERVED
MODE OUT 1
MODE OUT 2
MODE OUT 3
MODE OUT 4
CALL OUT
CALL OUT GND
MAX 30mA
DC 5V OUT
GND
CLOCK ADJ
REC
EMERGENCY
RESERVED
MODE OUT 1
MODE OUT 2
MODE OUT 3
MODE OUT 4
CALL OUT
CALL OUT GND
MAX 30mA
DC 5V OUT
GND
First Unit
Second Unit
The following setting is made for the second unit only.
1. Press the SET UP button
}
<SETTINGS>
}
<INITIAL SET
UP/INFORMATION>
}
<REAR TERMINAL SETTINGS>
}
Select “HDD REMAIN” in the <CALL OUT SETTINGS>
screen. Display the “20%” and confirm.
<CALL OUT SETTINGS>
>>HDD REMAIN 20
%
HDD FULL OFF
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
