50
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Various playback functions
■
Playing still frames
1. Press the PAUSE button during playback.
• The unit switches to still frame playback. Press the button
again to resume playback.
• If a camera number (1 ~ 9) button is pressed during single
screen still frame playback, the video of the camera number
button pressed will be displayed by searching forward.
■
Shuttle viewing/direct shuttle viewing
Turning the SHUTTLE ring during still frame playback,
playback or reverse playback, the playback speed can
be changed.
1. (During shuttle viewing • • • )
Turn the SHUTTLE ring during still frame playback.
• The playback speed depends on the angle the SHUTTLE
ring is turned.
• When letting go of the SHUTTLE ring, the ring will return
to the center and the unit will return to still frame playback.
2
3
4
5
6
7
8
1 High-speed rewind (300MB units)
2 Reverse speed search (30MB units)
3 Reverse speed search (1MB units)
4 Reverse speed search (Skip 30fields)
5 Still frame playback
6 Forward speed search (Skip 30fields)
7 Forward speed search (1MB units)
8 Forward speed search (30MB units)
9 High-speed fast forward (300MB units)
1
9
2. (During direct shuttle viewing • • • )
Turn the SHUTTLE ring during playback or reverse playback.
• The playback speed depends on the angle the SHUTTLE
ring is turned.
• When letting go of the SHUTTLE ring, the ring will return
to the center and the unit will return to still frame playback.
(The unit will not return to playback or reverse playback.)
■
Shuttle hold
The playback speed can be maintained even when let-
ting go of the SHUTTLE ring during shuttle viewing.
1. Press the PAUSE (SHUTTLE HOLD) button while holding
the SHUTTLE ring in angle during shuttle playback.
2. Let go of the SHUTTLE ring.
• The playback speed is maintained.
• To cancel shuttle hold, press the PAUSE button. The unit
will switch to still frame playback.
■
Frame-by-frame palyback
1. Turn the JOG dial during still frame playback.
• Clockwise : Forward frame feeding.
• Counterclockwise : Reverse frame feeding.
• Clockwise and hold : Continuous forward frame feeding.
• Counterclockwise and hold : Continuous reverse frame
feeding.
• When turning of JOG dial is stopped : Unit returns to still
frame playback.
！
During frame feeding in the single screen mode,
the frame feeding operation may not operate cor-
rectly when the JOG dial is turned too fast since
frame feeding is performed while searching the video
of the display camera number.
■
Reverse palyback
1. Press the REV. PLAY (REVERSE PLAYBACK) button while
playback is stopped.
• Playback will be made in the reverse direction. Playback
will stop when press the STOP button.
When reverse playback is performed first after
inserting the power, the last recorded video will be
played back in reverse first.
■
High-speed fast-forward/high-speed rewind
1. Turn the SHUTTLE ring for more than 1 second while
playback is stopped.
• Clockwise for more than 1 second :
Will activate High-speed fast-forward playback (300 MB units).
• Counterclockwise for more than 1 second :
Will activate High-speed rewind playback (300MB units).
• Press the PLAY/STOP button: Playback is stopped.
During high-speed fast-forward/rewind, the current
position is displayed on the bottom or top of the screen. S
(start) and E (end) indicate the beginning and end of the HDD
space and “I” indicate the current position.
■
Changing playback intervals
Although playback is performed using the same intervals
during playback and reverse playback as the recording in-
tervals, the playback interval can also be changed. This is
convenient when playing back recordings with fast motion
slowly or when playing back video recorded using extended
recording intervals fast.
1-1. (To play back recording with fast motion slowly • • • )
Press the REV. PLAY (REVERSE PLAYBACK) button during
playback or reverse playback.
• Playback or reverse playback will be made at 8 second
intervals per camera (or 72 seconds if there are 9 cameras).
1-2. Press the PLAY button.
• The playback interval is changed to a faster setting (4 sec.,
2 sec., and so on) each time the button is pressed.
2-1. (To play back video recorded using extended recording
intervals fast • • • )
Press the PLAY button during playback or reverse playback.
• Playback or reverse playback will be made at 0.03 second
intervals per camera.
2-2. Press the REV. PLAY (REVERSE PLAYBACK) button.
• The playback interval is changed to a slower setting (0.06
sec., 0.1 sec., and so on) each time the button is pressed.
！
Audio cannot be played back when changing the
playback interval.
！
Once the playback interval is changed, audio will
not be played back even when returning the play-
back interval to the original value. To playback au-
dio, pause playback and then play the video again.
