Graphic Operation Terminal F940GOT
Changeover of Display Screen (FX-PCS-DU/WIN-E) 11
11-13
11.5
Screen changeover by screen No. stored in memory
This paragraph describes the method to display a screen stored in the memory using the
screen No. storage function.
The screen No. storage function can be set in the "Change Screen" object.
Only when "Save Current Screen" of the "Change Screen" object is made effective with a
check mark, a screen No. displayed just before screen changeover is stored in the memory in
the GOT.
*1 Contents stored in the screen No. storage memory
The screen No. storage memory in the GOT can store only one screen at a time. Accord-
ingly, when "Save Current Screen" is made effective on a newly displayed screen, the
contents of the memory is updated.
Example: Suppose that the screens are changed over as follows.
*2 Keeping of the contents stored in the screen No. storage memory
The contents stored in the screen No. storage memory is kept only while the power is
turned on in the GOT main body. When the power is turned off, the memory is cleared.
10
Screen No. 10
Screen No. 11
SET VALUE CHANGE
TIMER SETTING
"TIMER"
key
Press the "TIMER" or
"COUNTER" key to change
over the screen.
l
Two "Change Screen" objects are registered as shown
below. "Save Current Screen" is made effective in one,
and not made effective in the other.
"COUNTER"
key
T0
10 sec.
Internal memory to store the
screen No.
*1
Undefined
Screen No. 12
COUNTER SETTING
C0
10 sec.
*2
l
"Save Current Screen"
is made effective.
When the TIMER touch
key is pressed and the
screen No. 11 is
displayed, the screen
No. 10 is stored in the
internal memory.
l
"Save Current
Screen" is not made
effective.
Even if the
COUNTER touch key
is pressed and the
screen No. 12 is
displayed, the screen
No. is not stored in
the internal memory.
l
Characters "TIMER" and "COUNTER"
are displayed using the "Text" object.
Example
Touch key
No. 0
Touch key
No. 1
COUNTER
TIMER
Internal memory to store the
screen No.
Control Input
Bit Device
Touch key No. 0 Not specified
Not specified
Condition
Screen No.
(Destination
Screen)
Save Current
Screen
11
12
Made effective
Not made effective
Screen changeover
Touch key No. 1
1
2
Not set
0
10
20
No.0
No.10
No.20
No.30
When the screen
No. 30 is
displayed, the
screen No. "20"
which was
displayed just
before is stored in
the memory.
Internal memory to
store the screen No.
Storage
Screen No.
Summary of Contents for F940GOT-LWD-E
