10.3 Error Message and System Alarm
10 - 19
9
M
A
IN
TE
N
A
N
C
E AN
D
IN
SP
ECTIO
N
10
TROU
BLES
H
OOTING
APP
ENDICES
352
Recipe file make error. Reboot
GOT after inserting memory
card.
Failed to generate recipe file.
Reboot the GOT after installing the CF card or USB memory.
353
Unable to write Recipe file.
Confirm memory card is
inserted.
Failed to write in the recipe file.
• Confirm the write-protection of the CF card or USB memory.
• Confirm the contents of the CF card or USB memory.
• Do not pull out the CF card or USB memory while recipe is operating.
354 Recipe file write error
Error occurred while writing in the recipe file.
Do not unplug the CF card or USB memory while recipe is operating.
355 Recipe file read error
Error occurred while writing in the recipe file.
• Do not unplug the CF card or USB memory while recipe is operating.
• Confirm the contents (device value) of the recipe file in the CF card or
USB memory.
356
File system error occurred in
PLC. Confirm file register.
Error occurred in the specified file register when executing the recipe
function by specifying the file register name.
• Execute the recipe function again after confirming the file register
name.
• Execute the recipe function again after formatting the PC memory in
the specified PLC CPU drive with GX Developer.
357
Error in specified PLC drive
Confirm PLC drive
When executing the recipe function specifying the file register name,
error occurred in PLC CPU drive.
• Execute the recipe function again after confirming the specified PLC
CPU drive.
• Execute the recipe function again after formatting the PC memory in
the specified PLC CPU drive with GX Developer.
358
PLC file access failure. Confirm
PLC drive.
When the recipe function is executed specifying the file register name,
PLC CPU file register could not be accessed.
• Execute the recipe function again after confirming the specified PLC
CPU drive / file register name. (When you specify drive 0, execute the
recipe function again after changing to other drives.)
• Confirm whether the CF card or USB memory are write-protected, and
execute the recipe function again.
• Confirm that the security key is not set on the specified CPU, and
execute the recipe function again.
359
Processing from another
peripheral device. Execute it
after.
When the recipe function is executed specifying the file register name,
other peripherals carry out the process to the file register.
Wait until the processing of other peripherals end, and execute the recipe
function again.
360
0 divisor division error. Confirm
operation expression.
Zero division occurred by the data operational expression.
Review the data operational expression so that the divisor should not
become 0.
361
Specified device No. is out of
range.
The entered file number is out of range.
Check the entered file number, and enter a valid value (1 to 9999).
362
Invalid device value in time
action setting
When controllers are controlled with the GOT's time action function, the
set No. is our of range, or the set device values regarding the operation
settings are out of range or invalid.
Set valid values.
370
Upper and lower limit value
error. Confirm value setting.
The setting of lower/upper limit value is [Upper limit < Lower limit].
Correct the setting so as to be "Upper limit Lower limit".
380
Insufficient USB drive capacity.
Confirm the drive capacity.
Available memory of the USB memory is insufficient.
Confirm the available memory of the USB memory, and increase the
memory if it is low.
Error
code
Error message
Action
Channel No.
storage
Summary of Contents for GOT 1000 GT16
