10 - 26
10.3 Error Message and System Alarm
587
Specified record number does
not exist.
The advanced record of non-existing number is about to be executed.
Execute record of existing number.
588
Cannot save recipe data to read
only record.
Saving recipe is about to be executed to the record of which recipe device
value cannot be edited.
Make the recipe device value of the record editable with Advanced
Recipe Setting of GT Designer3 or GT Designer2 or specify the record of
which recipe device value can be edited.
589
Recipe device save error.
Recipe file does not exist.
Saving recipe is about to be executed to the advanced recipe setting that
is set for not using file.
Specify the advanced recipe setting that uses file.
590
Recipe device upload error.
Recipe device value does not
exist.
Loading recipe is about to be executed to the record of which recipe
device value is not set.
Specify the record of which recipe device value is set.
591
Advanced Recipe error. Check
recipe data.
The advanced recipe setting is not correct.
Confirm the advanced recipe setting of the project data and download it
to the GOT again.
595 Logging file error.
Logging file error.
When collecting data again, delete logging files and management files.
596
Logging setting does not exist or
setting value error.
Logging setting does not exist or setting value error.
Specify an existing logging setting in the historical trend graph setting and
the historical data list setting.
597
The specified logging ID does
not exist.
Check the logging ID in the historical trend graph setting.
• When setting the logging, enter an existing logging ID.
• When setting the logging ID by using a device or the graph offset
function, specify the device for the logging ID set in the logging setting.
598
The specified logging setting is
incompatible.
• Configure the setting so that the number of logging devices set for the
logging ID exceeds that of data lines on the historical trend graph.
• Configure the setting so that the data type of the logging device set for
the logging ID is the same as that of the device specified in the
historical trend graph.
600
Unsupported version of printer
unit.
The version of OS installed in the GOT is not compatible with the printer
unit.
Install the extended function OS (Printer) with the latest GT Designer3 or
GT Designer2.
601 Printer unit error.
The printer unit is installed incorrectly. The built-in flash memory of the
printer unit is broken or the guaranteed life has been elapsed.
Check that the printer unit is installed correctly.
When the printer unit has been installed correctly, the built-in flash
memory is broken or the guaranteed life has been elapsed. Replace the
printer unit with new one.
602 Video/RGB unit not mounted
Check if the video/RGB input unit is installed.
Check if the GOT used supports video/RGB input.
603 External I/O unit error
Check if the external I/O unit is correctly installed.
604 Sound output unit error
Check if the sound output unit is correctly installed.
605 USB device I/F error
The error may be caused by a failure in the GOT.
Contact your local Mitsubishi representative.
606
Multimedia processing unit is
not mounted.
Multimedia unit is installed incorrectly.
Check that the multimedia unit is installed correctly.
*1
610 Insufficient memory capacity.
The memory capacity for the MES interface function is insufficient.
Delete unnecessary files, and reserve memory.
Error
code
Error message
Action
Channel No.
storage
Summary of Contents for GOT 1000 GT16
