Mitsubishi HC3000/HC910, Brochure & Specs

24-frame/sec.
movie film signal

Conversion to 
30-frame/sec. 
with 2-3 pull-down

1 frame

1 frame

1 frame

1 frame

1 frame

New Color Wheel

Stopped down iris(4000:1)

Fully open iris(2700:1)

Without 10-bit 3D Y/C separation

With 10-bit 3D Y/C separation

2000:1

4000:1

Motor-driven variable lens aperture equipped, for optical 

contrast adjustments that ensure optimal incident light 

supply to the DMD chip. Two-level remote control switching 

further streamlines use of selected brightness levels.

■

 Further evolving the motor-driven iris lens with

     2-level switching

■

 New color wheel with true color reproduction 

     and handsome brightness

This projector features a DMD chip (wide panel) with 

stellar 1024

×

576 dot resolution. Mirror inclination angle 

of 

±

12 degrees effectively cuts black diffused light. 

Besides this, the rear structure of the mirror uses dark 

metal to block diffused reflection and stray light, setting 

the scene for fine and rich gradation.

■

 Dark chip 2-DMD, for high resolution of 1024

×

576

Movie film and other media recorded at 24 frames per 

second are converted to 30-frame/sec. images, the same as 

TV broadcasts. The bottom line is projection of high-detail 

images closing in on the fine texture portrayed with film.

■

 Mounted with 2-3 pull-down, 

     for classy reproduction of movie software

The digital trapezoidal distortion correction function 

enables correction of picture distortion at 

±

20 steps.

■

 Trapezoidal distortion correction

Image color and brightness signals are separated with 

superb accuracy, using 3D processing. Cross color 

(rainbow pattern noise) and dot interference (dotted 

noise) are effectively curbed, while further use of the 10-

bit processing color decoder reproduces images with 

even greater clarity.

■

 Equipped with high picture quality reproduction circuit 3D Y/C separation, 10-bit color decoder

This projector produces outstanding brightness of 1000lm. 

Even in living rooms or other brightly lit spaces, 

comparatively flat video software or sporting events can 

also be savored through top-quality images.

■

 Top picture quality even in brightly light living

     rooms, producing high luminance of 1000lm

■

 Superb contrast to 4000:1

Equipped with an optical engine mounted with high-detail 

all-glass lens, forging dramatic 

improvements in contrast. 

Motor-driven iris function lens 

aperture further enhances the 

package, elevating contrast to 

the stellar level of 4000:1.

All-Glass Lens

Note: Photo shows the 
HC3000 remote control.

Note:Photo shows the HC3000.

■

 25dBA low noise performance 

Hushed low noise level of 25dBA realized with use of a low-noise fan, 

color wheel holder configuration and lamp fin dimensions.

■

 Center lens and front exhaust, for trouble-free installation and viewing

Adopted for redoubled ease in focusing the projected image at the center of the 

screen is a center design that positions the lens at the center of the unit. And 

with hot air released from the front-mounted exhaust port, there is no difficulty 

in viewing from the side or behind the projector.

< Digital Micro-Mirror Device > 

< DMD Pixel Composition Map >

Torsion hinge

Yoke

Landing chip

Mirror

White has been added to the conventional color wheel 
(made up of six color parts), boosting brightness to an 

outstanding 1000lm. A special 

coating is also used to raise 

the reproduction of reds - a 

vital color group for the sake 

of image reproduction.

■

 Illuminated remote control, easy to use 

     in darker rooms too

The system includes an illuminated remote control 

panel, with the buttons lighting up for easy use 

even in darkened rooms. Picture quality is also 

corrected also by remote, enabling direct operation.