15
Advanced Functions
Reference page
ENGLISH
POWER LOSS LIST CLEAR
Turn the SHUTTLE RING
then POWER LOSS LIST
will be cleared.
<MAINTENANCE>
POWER LOSS LIST
ALARM LIST
ALL MENU INITIALISE
POWER LOSS LIST CLEAR
ALARM LIST CLEAR
<REPEAT REC TIMES>
0
<ELAPSED TIME>
0H
<ALARM LIST>
0001 31-01-’01 00:00
0002
0003
0004
0005
0006
0007
0008
ALARM LIST CLEAR
Turn the SHUTTLE RING
then ALARM LIST will be
cleared.
<MAINTENANCE>
POWER LOSS LIST
ALARM LIST
ALL MENU INITIALISE
POWER LOSS LIST CLEAR
ALARM LIST CLEAR
<REPEAT REC TIMES>
0
<ELAPSED TIME>
0H
Note
•
Up to 3 power failure start times will be displayed. If more
than 3 failures have occurred, the first start time and the last
2 start times will be displayed on the list.
Clearing the power loss list
1. Select POWER LOSS LIST CLEAR in
<MAINTENANCE> menu and turn
SHUTTLE to the right.
2. Turn SHUTTLE to the left to clear the
list.
•
<MAINTENANCE> menu
appears.
To exit the menu without clearing
the list, press MENU button.
3. Press MENU button.
•
Once the list is cleared, the Power
Loss indicator ( ) will go off.
Displaying/clearing the alarm list
Displaying the alarm list
The alarm recording start time are logged in the VCR’s Alarm
List. To view the list, please follow the steps listed below.
1. Press MENU button.
•
<MAIN MENU> appears.
2. Turn JOG to select MAINTENANCE
and turn SHUTTLE to the right.
•
<MAINTENANCE> menu appears.
3. Turn JOG to select ALARM LIST and
turn SHUTTLE to the right.
•
<ALARM LIST> appears.
4. Press MENU button.
•
The day and present time appears
on screen.
Note
•
Maximum of 9,999 alarm recording start times will be counted.
•
Up to 8 alarm recording start times will be displayed. If more
than 8 alarm recordings have occurred, the first start time
and the last 7 start times will be displayed on the list.
Clearing the alarm list
1. Select ALARM LIST CLEAR in
<MAINTENANCE> menu and turn
SHUTTLE to the right.
2. Turn SHUTTLE to the left to clear the
list.
•
<MAINTENANCE> menu appears.
To exit the menu without clearing
the list, press MENU button.
3. Press MENU button.
•
Once the list is cleared, the Alarm
Recording indicator (
) on the
fluorescent display will go off.
Tape usage and elapsed time of VCR
REPEAT REC TIMES
indicates how many times a tape has
been recorded over since it was first
inserted.
ELAPSED TIME
indicates the total time the VCR has
been used for recording or playback.
1. Press MENU button.
•
<MAIN MENU> appears.
2. Turn JOG to select MAINTENANCE
and turn SHUTTLE to the right.
•
<REPEAT REC TIMES> and
<ELAPSED TIME> are shown at
the bottom of the
<MAINTENANCE> menu.
3. Press MENU button.
•
The day and present time display
appears on screen.
Note
•
<REPEAT REC TIMES> are:
–
counted when the tape ends during recording (except
when TAPE END of FIRST TIME SET UP menu is set to
STOP).
–
memorized even if the VCR is turned off.
–
reset when a tape is inserted.
–
shown up to a maximum figure of 200, beyond which the
display will show OVER.
•
<ELAPSED TIME> is shown up to 89,999 hours.
Lock function
Each time the LOCK button is pressed, the Lock/Lock All
indicator illuminates on the fluorescent display in the order of
(No display)
... All or some of the
buttons on the front panel of the VCR are locked, and the VCR
is kept in the current condition. To release the lock, press
LOCK button until nothing is displayed on the fluorescent
display.
: All buttons except REC button and EJECT button
are locked.
: All buttons are locked.
(No display): No buttons are locked.
Summary of Contents for HS-1096E
Page 32: ...872C270A9 PRINTED IN JAPAN...
