30
Installation
Note
A point to notice
Info.
Supplementary information
Setting the Menus (Cont.)
DISPLAY
Setting the display mode (DISPLAY MODE)
1 : Shows date and present time.
2 : Shows date, day of the week,
present time and recording mode.
3 : Displays nothing. In case of alarm
recording, displays same items as
DISPLAY MODE 2.
4 : Displays nothing.
* shown when DISPLAY MODE 1, 2 or 3 is selected.
Setting the size of letter for date and present time display
(TIME DATE SIZE)
SMALL : The size of the letters become small.
LARGE : The size of the letters become large.
Setting the background color (BLUE BACK)
ON
: The blue colored screen overlays on the live picture
when the menu is displayed on the monitor.
OFF
: The live picture is overlaid with the menu display.
Note
•
When the setting is OFF and the video signal is not present,
the blue colored screen and the menu is displayed on the
monitor.
•
When the setting is ON and the video signal is not present,
the background color will be in blue. Also, the warning “NO
SIGNAL” flashes on screen and “noSIg” flashes on the
fluorescent display during recording.
<DISPLAY>
DISPLAY MODE
1
TIME DATE SIZE
SMALL
BLUE BACK
OFF
e.g.<MODE 1>
07-09-’01 00:00:00
Month
Day
Year
Hour
Alarm
Recording
Counter*
Second
Minute
0 7 - 0 9 - ’ 0 1 2 0 : 2 5 : 0 0 A 0 0 0 1
DISPLAY MODE 1
Month
Day
Day of
the Week
Year
Hour
Alarm
Recording
Counter*
Second
Minute
0 7 - 0 9 - ’ 0 1 M O N A 0 0 0 1
2 0 : 2 5 : 0 0 2
Recording
Mode
DISPLAY MODE 2 and 3
TIMER PROGRAM
page 10, Timer Recording.
ENGLISH
FRANÇAIS
ESPAÑOL
Use JOG to select,
and ENTER .
LANGUAGE SELECTION
The menu which appears on screen is offered in 3 languages,
English (ENGLISH), Spanish (ESPAÑOL) or French
(FRANÇAIS).
This menu appears by pressing MENU button, when the VCR is
turned on for the first time after the initial purchase or when
RESET button is pressed (while unit is ON).
1. Press MENU button.
•
The menu as shown to the right
appears.
2. Turn JOG to select the desired
language.
3. Turn SHUTTLE to the right.
•
<MAIN MENU> in the selected language appears on
screen.
4. Press MENU button to exit.
Note
•
After first time setup and selection of the language to be
used, the only way to go back and access the main menu in
the three languages is to PRESS the RESET button found
on the rear panel. The RESET button can be accessed with
a small pointed object. Once the RESET button is pressed,
repeat steps 1 to 4 above.
MAIN MENU
DISPLAY
Sets the display format of the date
and present time on screen.
TIMER PROGRAM
Sets the timer recording.
RECORDING SET UP
Sets the alarm recording mode,
alarm recording duration and emergency recording, etc.
REAR TERMINAL
Sets the frequency division ratio of CLOCK OUT, output
signal of CALL OUT terminal and MODE OUT terminal, etc.
MAINTENANCE
Displays the power loss list and alarm list, etc. Also,
initializes all menu settings, clears the power loss list and
alarm list.
CLOCK/FIRST TIME SET UP
Sets the present time and the operation at the tape end, etc.
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
Use JOG to select,
and ENTER.
Press MENU to exit.
Summary of Contents for HS-S9600U
Page 44: ...872C198A6 PRINTED IN JAPAN ...
