![background image](http://html1.mh-extra.com/html/mitsubishi/hs-u576/hs-u576_owners-manual_1809298037.webp)
35
Editing Features
Using Two VCRs to Copy
There are two basic ways to make a copy of a tape.
One way is to use the HS-U576 to record and another VCR for playback.
The other way is to use another VCR to record and use the HS-U576 for playback.
Regardless of which method you may choose, you will need one RCA audio cable and one RCA video cable to connect
the two VCRs. If you do not have these cables, they are available at your local electronics dealer.
R
VIDEO
IN
L/MONO
AUDIO IN
L
R
L
R
AUDIO IN 2 R
AUDIO IN 2 L/MONO
AUDIO OUT L
AUDIO OUT R
VIDEO OUT
VIDEO
IN 2
RECORDING
PLAYBACK
HS-U576
Using the HS-U576 to record from another VCR
1
Connect the audio cable to AUDIO OUT L and R
on the playback VCR and to AUDIO IN
˙
L/
MONO and R on the HS-U576. If the playback
VCR is mono, use only the AUDIO IN
˙
L/
MONO on the HS-U576.
2
Connect a video cable to VIDEO OUT on the
playback VCR and to the VIDEO IN
˙
on the HS-
U576.
3
If the playback VCR is Hi-Fi, set the audio monitor
to Stereo.
4
Use INPUT to set the HS-U576 to External 1
(L1) if you used the HS-U576 rear panel jacks, or
External 2 (L2) if you used the HS-U576 front
panel jacks.
5
Put a blank tape into the HS-U576.
6
Put the tape you want to copy into the playback
VCR and find the cue point. Press STOP if the
tape is playing.
7
On the HS-U576, press REC, then PAUSE.
8
On the playback VCR, press PLAY, then PAUSE.
9
Press the PAUSE buttons on both VCRs at the
same time to begin copying the tape.
10 When finished, press STOP on both VCRs.
Summary of Contents for HS-U576
Page 61: ...59 Note...
Page 62: ...60 Note...