![background image](http://html1.mh-extra.com/html/mitsubishi/hs-u577/hs-u577_owners-manual_1809920018.webp)
16
7
When the Brand code is correct, press ENTER. The screen
will add a Channel selection.
8
Use the ADJUST buttons to select the channel on which your
cable box or digital cable box sends a signal to the VCR
(normally channel 3 or 4). If you connected your cable box or
digital cable box with audio/video cables, use INPUT to select
L1
(if you used the rear panel jacks), or
L2
(if you used the
front panel jacks). You cannot use both digital cable box and
satellite receiver. Thus if you selected Digital cable box only in
step
4
, you cannot select
L2
.
9
After entering the channel number, press ENTER. The VCR
will begin memorizing the available channels. During this
process your TV screen and your cable box or digital cable box
should all display each channel number one by one. You can
cancel the memorization at any time by pressing CANCEL on
the remote control.
After the VCR has memorized all the channels, the screen will
return the VCR picture.
IMPORTANT
Automatic channel memorizing may include vacant
channels if there are stray signals or noise on those
channels. If this occurs, you can manually delete the
channels using the procedure in the section
Adding and
Deleting Channels
.
You do not need to perform this set-up again unless your
cable company changes their channel lineup, or you move
the VCR to a new address.
Satellite Receiver Control
If you are using a satellite receiver, you can set up your VCR to
change channels on the satellite receiver.
1
Make sure you are viewing the picture coming from your VCR.
Press MENU on the remote control. VCR Main Menu appears.
2
Press the ADJUST buttons on the remote control to select First
Time Set-Up. Press ENTER.
3
You will see the First Time Set-Up menu. Press the ADJUST
buttons to select Sat. receiver.
IMPORTANT
You cannot select Sat. receiver if you select Digital Cable
box only in step
4
of Memorizing Channels Automatically
(on page 14).
ƒFirst Time Set-Up
Your choices are
≈Set the clock
∆Memorize channels
«Add/delete channels
±Sat.receiver
(OFF)
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
∆Memorize channels
Please enter code from
your Owner's Guide:
ƒBrand code 1
ƒChannel
3
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
∆Memorize channels
Now memorizing all the
stations you can receive
Channel 3
Stand by this may take
a few minutes
To cancel memorization,
press CANCEL
Setting Up Your VCR