35
Advanced Playback Controls
Special effects
You can use FF and REW on the front panel, or the
I
\
and
^
I
on the remote to control the playback speed of the tape.
Using the FF and REW on the front panel to control the playback
speed
1
While the VCR is playing a tape, press PAUSE to freeze the
picture.
2
Press the FF or REW on the front panel. Each press of FF
changes the playback speed by one step in the forward
direction. Each press of REW changes the speed by one step
in the reverse direction. (See the chart below.)
3
To resume normal playback, press PLAY.
Using the
I
\
\
\
\
\
and
^
^
^
^
^
I
on the remote to control the playback speed
1
While the VCR is playing a tape, press
I
\
or
^
I
on the
remote control. Each press of
^
I
changes the playback
speed by one step in the forward direction. Each press of
I
\
changes the speed by one step in the reverse direction. (See
the chart below.)
2
To resume normal playback, press PLAY.
After about 5 minutes in the still or slow-motion mode, the VCR will
automatically stop to avoid damage to the tape. The picture may
vibrate vertically when you pause the VCR’s picture.
Still adjustment
Sometimes during still frame, the picture may vibrate or shake. To
correct this problem, press CHANNEL on the front panel until the
vibration is reduced or stops. Side-to-side vibration cannot be
corrected.
CHANNEL
2
1
3
5
4
6
8
7
9
0
INDEX
REW
FF
1/30 reverse slow-motion playback
1/10 reverse slow-motion playback
1/5 reverse slow-motion playback
Reverse playback
Reverse speed search
Reverse high speed search
Reverse fast playback
Press FF on the front panel
or
^
|
on the remote control
Press REW on the front panel
or
|
\
on the remote control
High speed search
Speed search
Fast playback
1/5 slow-motion playback
1/10 slow-motion playback
1/30 slow-motion playback
Still
Playback
Advanced Features
