6. NetCommand IR Control
59
Key Name in
Learning Screen
Special Operation Description and Setup
How to Use
Power On
Manual Power On/Off
Use for devices that have only one
POWER
key.
Press
1.
INPUT
to display the
Input Selection
menu.
Press
2.
to highlight the icon for the
device to be powered on or off.
With the
3.
Input Selection
menu still displayed,
press
POWER
to send the power signal; you may
need to press
POWER
twice.
Note:
If you press
POWER
without the
Input Selec-
tion
menu displayed, the TV will turn off.
Press
4.
ENTER
to switch the TV to the device.
Power On
Power Off
Automatic Power On/Off
This feature is only for devices that have separate
POWER ON
and
POWER OFF
keys on their original remote
controls. If your device does not have a separate
POWER OFF
key, do not use the
Power Off
learn-
ing position; use only the Manual Power ON/OFF
method described above.
In the NetCommand
Learn
screen:
a. “Learn”
the
Power On
command in the
Power
On
learning position.
b. “Learn”
the
Power Off
command in the
Power Off
learning position.
To Power On the Device
•
Press
1.
INPUT
to display the
Input Selection
menu.
Press
2.
to highlight the icon for
the device to be powered on or off.
Press
3.
ENTER
to switch the TV to the device
and NetCommand will send the
Power On
command to the device.
To Power Off the Device
•
When you turn the TV off, the TV sends all
learned
Power Off
commands to all devices.
Menu
Displaying the Menu for a Device
While watching a device, press
1.
INPUT
to display
the
Input Selection
menu with the device icon
highlighted.
Press
2.
MENU
to send the menu signal to the
device. The
Input Selection
menu will auto-
matically clear from the screen.
S pecial Operation Methods
Operating Net Command-Controlled Devices
Controlling an A/V Receiver
See page 61 to set up control of an A/V receiver.
Switching Audio to and from the A/V Receiver
Press
1.
AUDIO.
Press
2.
to show the Speakers option.
Press
3.
to select either
AV Receiver
or
TV
.
Controlling A/V Receiver Power
Press
1.
AUDIO.
Press
2.
to show the Speakers option.
Press
3.
to select
AV Receiver
.
If the A/V receiver does not power on automatically, point
4.
the remote control at the
TV
(not the A/V receiver) and
press
POWER
.
Press
POWER
to power off the A/V receiver.
Controlling Other A/V Receiver Functions
With the A/V receiver powered on and selected, the
TV’s remote operates the volume and mute functions.
Also, when you switch to a device in the
Input Selec-
tion
menu, the A/V receiver automatically switches to the
correct audio input for the device.
Controlling Most Device Types
As an example of NetCommand control, if you are watch-
ing your cable box and you wish to tune to the next
channel higher, press
CH/PAGE
. NetCommand then sends
the “learned” channel-up control signal to the cable box.
With an IR emitter properly positioned in front of the
1.
device, use the
Inputs
>
Learn
screen to perform
NetCommand setup for the device.
When you wish to use the device, press
2.
INPUT
to
display the
Input Selection
menu.
Press
3.
to highlight the icon for the device.
Press
4.
ENTER
to switch the TV to the device.
Note:
if you have set up automatic input switching for
the A/V receiver, the A/V receiver will automatically
switch to the correct input for the device.
To operate the device using the
5.
TV’s
remote
control, set the slide switch to the
TV
position.
Point the remote control at the
6.
TV
(not the device)
and press the key for the desired function.
Summary of Contents for LaserVue L65-A90
Page 1: ...MODEL L65 A90 Owner s Guide...
Page 2: ......
Page 70: ...70 Appendices This page intentionally left blank...
Page 95: ......
![NEC MT800[1].PART1 User Manual preview](http://thumbs.mh-extra.com/thumbs/nec/mt800-1-part1/mt800-1-part1_user-manual_250403-1.webp)
