![background image](http://html1.mh-extra.com/html/mitsubishi/meldas-m600-series/meldas-m600-series_maintenance-manual_1809239040.webp)
4. DAILY MAINTENANCE AND PERIODIC INSPECTION AND MAINTENANCE
4.3 Replacement Methods
– 36 –
<When installed outside the control section: HDD unit>
Operation
section
PCB
Control
section
Heater power cable
F140 cable
HDD unit
Fixing screws
Heater power cable
HDD unit
F140 cable
1-pin indication mark
Heater power cable
Leave 4 pins open
F140 cable
1-pin indication mark
Take care to the connector
direction, and leave 4 pins
on the right open when
connecting.
Incorrect connections may damage the devices, so connect the cables to the specified
connectors.
Do not replace the HDD while the power is ON.
Dispose the spent HDD according to local laws.
CAUTION