Mitsubishi QA6ADP, User Manual

9 

  4. PART NAMES AND SETTING 

4.1 Part Names 

This section describes part names of the QA6ADP. 

1)

6)

2)

3)

4)

3)

7)

9)

8)

5)

No. Name 

Application 

1)  Extension cable 

connector 

Connector for sending/receiving signals to the main 

base unit or the other extension base unit and 

connecting an extension cable. 

2)  Stage number 

setting connector 

Connector for setting the number of extension stages. 

3) 

Adapter module 

mounting screw   

(M3 screw) 

Screw for mounting this adapter module on the 

extension base unit. 

4)  Adapter module 

mounting bracket 

Bracket for mounting this adapter module on the 

extension base unit. Utilize screws used in the 

extension base unit. (Included parts) 

5)  Mounting bracket 

fixing screw 

Screw for mounting an adapter module mounting 

bracket on the extension base unit. (Included parts) 

6) 

Base side stage 

number setting 

connector window 

Window is transparent so that a stage number setting 

connecter of the extension base unit side can be seen. 

7)  Extension base unit 

mounting connector 

Connector to be connected to the A extension cable I/O 

connecter of the extension base unit. 

8)  Board fixing screw 

Screw for mounting this adapter module on the 

extension base unit. (Included parts) 

9) Mounting 

guide 

Guide for positioning an extension base unit mounting 

connector by inserting this into a cover fixing square 

hole of the extension base unit at the time of mounting.