3
33
3Installing the option devices
Installing the option devices
Installing the option devices
Installing the option devices
Installing the solenoid valve set
Installing the solenoid valve set
Installing the solenoid valve set
Installing the solenoid valve set (
1
A-VD04-RP
(
1
A-VD04-RP
(
1
A-VD04-RP
(
1
A-VD04-RP/
1
A-VD04
/
1
A-VD04
/
1
A-VD04
/
1
A-VD04E
E
E
E-PR
-PR
-PR
-PR))))
3
33
3-
--
-3
1
3
1
3
1
3
1
3 Installing the option devices
3 Installing the option devices
3 Installing the option devices
3 Installing the option devices
3.
1
Installing the solenoid valve set
3.
1
Installing the solenoid valve set
3.
1
Installing the solenoid valve set
3.
1
Installing the solenoid valve set
(
1
A-VD04-RP
(
1
A-VD04-RP
(
1
A-VD04-RP
(
1
A-VD04-RP/
1
A-VD04
/
1
A-VD04
/
1
A-VD04
/
1
A-VD04E
E
E
E-PR
-PR
-PR
-PR))))
Fig.3-
1 ：
Solenoid valve installation procedures
Fig.3-
1 ：
Solenoid valve installation procedures
Fig.3-
1 ：
Solenoid valve installation procedures
Fig.3-
1 ：
Solenoid valve installation procedures
The procedures for installing the solenoid valve and connecting the connector are shown in Fig. 3-
1
. The
The procedures for installing the solenoid valve and connecting the connector are shown in Fig. 3-
1
. The
The procedures for installing the solenoid valve and connecting the connector are shown in Fig. 3-
1
. The
The procedures for installing the solenoid valve and connecting the connector are shown in Fig. 3-
1
. The
installation procedures are as follow.
installation procedures are as follow.
installation procedures are as follow.
installation procedures are as follow.
1
) Using the tool installation screw holes (M4 screws; 6 places) on the top of the shoulder cover, install the
1
) Using the tool installation screw holes (M4 screws; 6 places) on the top of the shoulder cover, install the
1
) Using the tool installation screw holes (M4 screws; 6 places) on the top of the shoulder cover, install the
1
) Using the tool installation screw holes (M4 screws; 6 places) on the top of the shoulder cover, install the
plate 3 onto which the solenoid valve is installed.
plate 3 onto which the solenoid valve is installed.
plate 3 onto which the solenoid valve is installed.
plate 3 onto which the solenoid valve is installed.
2) Connect the user-prepared air hose
φ
6 to the quick-coupling (P port) 4 of the solenoid valve.
2) Connect the user-prepared air hose
φ
6 to the quick-coupling (P port) 4 of the solenoid valve.
2) Connect the user-prepared air hose
φ
6 to the quick-coupling (P port) 4 of the solenoid valve.
2) Connect the user-prepared air hose
φ
6 to the quick-coupling (P port) 4 of the solenoid valve.
3) Remove the grommet base 5 installed on the top of the shoulder cover.
3) Remove the grommet base 5 installed on the top of the shoulder cover.
3) Remove the grommet base 5 installed on the top of the shoulder cover.
3) Remove the grommet base 5 installed on the top of the shoulder cover.
4) Using a knife, cut the center of the grommet on the removed grommet base 5. Pass the solenoid valve side
4) Using a knife, cut the center of the grommet on the removed grommet base 5. Pass the solenoid valve side
4) Using a knife, cut the center of the grommet on the removed grommet base 5. Pass the solenoid valve side
4) Using a knife, cut the center of the grommet on the removed grommet base 5. Pass the solenoid valve side
connector through the hole, and connect to the connector (GR) installed on the connector base.
connector through the hole, and connect to the connector (GR) installed on the connector base.
connector through the hole, and connect to the connector (GR) installed on the connector base.
connector through the hole, and connect to the connector (GR) installed on the connector base.
5) Return the grommet base 5 to its original position.
5) Return the grommet base 5 to its original position.
5) Return the grommet base 5 to its original position.
5) Return the grommet base 5 to its original position.
Grommet
5. Grommet base
Shoulder cover
Tool installation screw
(M4: 6 places)
B port
4. P port
No.
1
solenoid valve
No. 2 solenoid
valve
No. 3 solenoid valve
Connector
No. 4 solenoid valve
A port
Pan-head screw
M3 * 20
1
. Pan-head screw
4-M4 * 8
3. Plate
(RP-
1
AH)
(RP-3AH/5AH)
(RP-3AH/5AH)
