3-66
External I/O cable
3 Controller
(4) External I/O cable
■ Order type ： ● 2D-CBL □□ Note） The numbers in the boxes □□ refer to the length. （05: 5m、 15: 15m）
■ Outline
This is the dedicated cable used to connect an external peripheral device to the con
-
nector on the parallel I/O interface. For parallel I/O unit is another option 2A-CBL.**.
One end matches the connector on the parallel input/output unit, and the other end is
free. Connect the peripheral device's input/output signal using the free end.
One cable correspond to the input 16 points and output 16 points.
Two cables are needed to connection of (input 32 points and output 32 points) with
built-in standard.
■ Configuration
Table 3-18 ： Configuration device
■ Specifications
Table 3-19 ： Specifications
■ Connector pin numbers and cable colors
Table 3-20 ： Connector pin numbers and cable colors
Notes） Pin number of connector<1> are 1C, 2C, ....20C, 1D, 2D, ....20D, connector<2> are 1A, 2A, ....20A, 1B, 2B,
....20B.
Part name
Type
Qty.
Remarks
External I/O cable
2D-CBL □□
1 pc.
5m or 15m
Items
Specifications
Number of cables x cable size
AWG #28 x 20P （40 pairs）
Total length
5m、 15m
Pin no.
Cable colors
Pin no.
Cable colors
Pin no.
Cable colors
Pin no.
Cable colors
1A/C
Orange/Red a
11A/C
Orange/Red c
1B/D
Orange/Black a
11B/D
Orange/Black c
2A/C
Gray/Red a
12A/C
Gray/Red c
2B/D
Gray/Black a
12B/D
Gray/Black c
3A/C
White/Red a
13A/C
White/Red c
3B/D
White/Black a
13B/D
White/Black c
4A/C
Yellow/Red a
14A/C
Yellow/Red c
4B/D
Yellow/Black a
14B/D
Yellow/Black c
5A/C
Pink/Red a
15A/C
Pink/Red c
5B/D
Pink/Black a
15B/D
Pink/Black c
6A/C
Orange/Red b
16A/C
Orange/Red d
6B/D
Orange/Black b
16B/D
Orange/Black d
7A/C
Gray/Red b
17A/C
Gray/Red d
7B/D
Gray/Black b
17B/D
Gray/Black d
8A/C
White/Red b
18A/C
White/Red d
8B/D
White/Black b
18B/D
White/Black d
9A/C
Yellow/Red b
19A/C
Yellow/Red d
9B/D
Yellow/Black b
19B/D
Yellow/Black d
10A/C
Pink/Red b
20A/C
Pink/Red d
10B/D
Pink/Blackb
20B/D
Pink/Blackd
