3-78
CC-Link interface
3 Controller
(8) CC-Link interface
■ Order type: ● 2D-TZ576
■ Outline
The CC-Link interface is the optioninterface to not only add bit data to the robot
controller. but also to add CC-Link field network function that allows cyclic
transmission of word data.
■ Configuration
Table 3-31 ： Configuration deviceon
Table 3-32 ： Procured by the customer
Fig.3-28 ： Example of CC-Link Product Configuration
■ Specifications
Part name
Type
Qty.
Remarks
CC-Link interface
2D-TZ576
1
Ferrite core
E04SR301334
2
Be sure to install this for noise countermeasure.
Part name
Type
Qty.
Remarks
Master station
QJ61BT11(Q series)
1
FX series products are not supported.
AJ61QBT11(QnA series)
A1SJ61QBT11(QnAS series)
AJ61BT11(A series)
A1SJ61BT11(AnS series)
A80BD-J61BT11(personal computer
board)
Communication cable
-
1
Shielded 3-core twisted cable
This cable may be manufactured by the customer.
Terminal resistor
-
1
110Ω or 130Ω is recommended.
Cc-Link interface
(this option)
Partner manufacturers' devices
I/O unit
Display
Sequencer
Robot arm
Controller
Personal computer
Inverter
