Do not stop the robot or apply emergency stop by turning the robot controller's
main power OFF. If the robot controller main power is turned OFF during
automatic operation, the robot accuracy could be adversely affected. Moreover,
it may interfere with the peripheral device by drop or move by inertia of the arm.
Do not turn off the main power to the robot controller while rewriting the
internal information of the robot controller such as the program or parameters.
If the main power to the robot controller is turned off while in automatic
operation or rewriting the program or parameters, the internal information of the
robot controller may be damaged.
Use the network equipments (personal computer, USB hub, LAN hub, etc)
confirmed by manufacturer. The thing unsuitable for the FA environment
(related with conformity, temperature or noise) exists in the equipments
connected to USB. When using network equipment, measures against the noise,
such as measures against EMI and the addition of the ferrite core, may be
necessary. Please fully confirm the operation by customer. Guarantee and
maintenance of the equipment on the market (usual office automation
equipment) cannot be performed.
*CR751-D or CR751-Q controller
Notes of the basic component are shown.
Please install the earth leakage breaker in the primary side supply power supply
of the controller of CR751-D or CR751-Q because of leakage protection.
CAUTION
CAUTION
CAUTION
CAUTION
保護アース端子
(PE)
漏電遮断器
(NV)
端子カバー
端子カバー
アース接続ネジ
コネクタ
AC200V
CR751コントローラ(前面)
CR751-D controller/CR751-Q drive unit
Earth leakage breaker
Cover
Cover
Connector
Grounding
screw
Grounding terminal
(PE)
Note) RV-2F series has operation panel.
Summary of Contents for RV-2F Series
Page 2: ......
