![background image](http://html.mh-extra.com/html/mitsubishi/s290u/s290u_service-manual_1809589031.webp)
9. Removal of AUDIO/MOTOR PCB ASSY
1. Remove the Front Case Unit following “1. Removal of
FRONT CASE UNIT”.
2. Remove the Top Case Assy following “2. Removal of
TOP CASE ASSY”.
3. Remove the MAIN PCB ASSY following “3. Removal of
MAIN PCB ASSY”.
4. Remove the three connectors (MA, MK and MH) as
shown in Fig. 3-7.
5. Remove the (
a
) screw and the AUDIO/MOTOR PCB
ASSY as shown in Fig. 3-7.
6. Remove the two (
b
) screws and the PCB Holder B as
shown in Fig. 3-7.
10. Removal of POWER SUB PCB ASSY
1. Remove the Front Case Unit following “1. Removal of
FRONT CASE UNIT”.
2. Remove the Top Case Assy following “2. Removal of
TOP CASE ASSY”.
3. Remove the MAIN PCB ASSY following “3. Removal of
MAIN PCB ASSY”.
4. Remove the Optical Unit following “4. Removal of
OPTICAL UNIT”.
5. Remove the AUDIO/MOTOR PCB ASSY following “9.
Removal of AUDIO/MOTOR PCB ASSY”.
6. Remove the three connectors (RB, NA and NX) as
shown in Fig. 3-8-1.
7. Remove the four (
a
) screws and the POWER SUB
PCB ASSY as shown in Fig. 3-8-2.
RB
NA
NX
a
MK
MA
MH
x1
b
x2
AUDIO/MOTOR
PCB ASSY
PCB Holder B
Fig. 3-7
Power Assy
POWER SUB PCB ASSY
Fig. 3-8-1
16
Summary of Contents for S290U
Page 83: ...16 ...
Page 180: ...113 SYMBOL NO ADDRESS X7A1 A 3 PCB MAIN COMPONENT SIDE ...
Page 188: ...121 ...