Chapter 3 Use of Operation Panel
TDP-324
-35-
Setup of the cleaning length (Special mode)
T
he length of the black bar printed at the time of head cleaning(Special mode) execution is changed
as follows.
1.
In the ready state, press the
menu
button
once, press the
+
button until ”Head
Cleaning” displays on the LCD.
2.
Press the
enter
button once, press the
+
button until ”Special Length” displays on the
LCD.
3.
Press the
enter
button, and display the setting
state of special length.
4.
Press the
+
or
-
button to change the setting of
the special length.
【
【
【
【
Useful tip
】
】
】
】
It can be set from 5mm to 10mm,
it increments of 1mm
.
When the setting value is enlarged, the effect of head cleaning becomes large,
but cleaning time becomes long.
5.
Press the
enter
button to confirm the setting of
the special length.
6.
Press the
clear
button repeatedly until the
ready state is displayed.
ﾍｯﾄﾞｸﾘｰﾆﾝｸﾞ
Head Cleaning
Special Length
Special Length 5
Special Length10
Special Length10
Summary of Contents for TDP-324
