![background image](http://html1.mh-extra.com/html/mitsubishi/vs-50800/vs-50800_owners-manual_1809466094.webp)
92
Chapter 3: Using the Special Features
removing the DiamondShield
TM
†In order to remove the
DiamondShield
,
you will need
to remove the side molding
panels from the TV. Use a
small flat head screwdriver for
pressing into the opening that
is found between the panel and
the TV side panel. Be very
careful not to scratch the
screen. Pull gently on the
panel corner with your hand
(wearing cloth gloves to
prevent fingerprints is encour-
aged) to remove the side
molding.
¢After removing the panels,
insert the flat head screw-
driver behind the
DiamondShield at either side.
Pull gently toward you, to
create a slight outward bow in
the shield. This will cause it to
pop out of the top panel. After
shield removal, reinstall the
side molding panels.
£To reinstall the
DiamondShield, remove the
side molding panels, slide the
screen into a side panel and
replace the moldings.
You may remove the DiamondShield
TM
screen from your television if needed.
If you want to remove the shield but feel you are unable to do so, please
consult your dealer for assistance. Before you begin, place a small piece of
masking tape on the surface of the DiamondShield that faces out, so it may be
easily identified, if you choose to replace it.
⁄
Important:
Store your DiamondShield carefully so that the screen does not
become scratched.
„ DiamondShield
TM
Removal