![background image](http://html1.mh-extra.com/html/mitsubishi/vs-sh10u/vs-sh10u_setup-and-installation-manual_1809617016.webp)
First edition
16
2.5. Test pattern display
Test pattern display/ cancel
TEST
Press once for adjustment white.
Press twice for crosshatch.
Press 3 times for blue 180.
Press 4 times for gray 30.
Press 5 times for full-bit white.
Test pattern display is also cancelled by pushing ESC button. If system is in the mode that you
can enter service menu by ESC button, service menu takes precedence over test pattern
cancellation.
2.6. RGB color mute
Red color mute/ cancel
R
Green color mute/ cancel
G
Blue color mute/ cancel
B
2.7. Remote ID function
Use the remote ID to operate the remote control toward specific projectors in the system.
Displaying remote control operability
Press
DISPL AY
button
Press
FUNC
+
DISPL AY
button
Setting to enable
Press
FUNC
+
0
+
0
enables remote control towards all projectors (default setting in turning
on).
Press
FUNC
+
*
+
*
(
*
stands for number button from
0
to
9
) enables remote control toward
specific projectors correspond to the ID number set by dip switch. Only DISPLAY button is
available even when remote ID is disable.
REMOTE ID
CLEAR
REMOTE ID
ENABLE **
REMOTE ID
DISABLE **
LAMP TIMER 99999H
LAMP A BUSY NEW
LAMP B STANDBY NEW
INPUT ANALOG
SYSTEM ID 1
NO SIGNAL(ANALOG)
Red indications when remote ID is disable.
Summary of Contents for VS-SH10U
Page 1: ...DLPTM Projector VS SH10U Set up and Installation Manual August 30 2002...
Page 8: ...First edition 8 1 2 Outline drawings 1 2 1 Circuit Box unit mm...
Page 9: ...VS SH10U Set up and Installation Manual 9 1 2 2 Optical Unit unit mm...
Page 56: ...First edition 56 6 2 6 axis adjuster Model Screw holes VS SH10U c e h j...