![background image](http://html1.mh-extra.com/html/mitsubishi/vs-sh10u/vs-sh10u_setup-and-installation-manual_1809617039.webp)
VS-SH10U Set-up and Installation Manual
39
3.5.3. MENU1 adjustment (effective for both analog and digital input)
The adjustment display will be displayed by pressing
M ENU1
M ENU1
M ENU1
M ENU1
button. Press
ESC
ESC
ESC
ESC
button to
activate the normal mode. If any value is changed in MENU1, the value will be saved in the
memory number displayed at the top of MENU1 (The value will be saved in MEMORY1 if the
display is shown below).
MENU1 adjustment display
3.5.3.1. DITHER adjustment
Turning ON/OFF DITHER. Normally keep it ON.
[Adjustment]
1) Select DITHER in MENU1.
2) Select ON or OFF.
3.5.3.2. BRIGHTNESS adjustment
Normally unnecessary to adjust the brightness. You can adjust the brightness of darker part of
the picture. However, darkening the picture excessively deteriorates the tone characteristics of
the darker part of the picture. Press
NO RMAL
NO RMAL
NO RMAL
NO RMAL
button to reset the value to the value adjusted
before shipping from factory.
[Adjustment]
1. Select BRIGHTNESS in MENU1.
2. Change the adjustment value.
3.5.3.3. CONTRAST adjustment
Normally unnecessary to change the contrast. You can adjust the picture darkness and
brightness with this adjustment. However, darkening the picture excessively deteriorates the
tone characteristics. Press
NO RMAL
NO RMAL
NO RMAL
NO RMAL
button to reset the value to the value adjusted before
shipping from factory.
[Adjustment]
1. Select CONTRAST in MENU1.
2. Change the adjustment value.
3.5.3.4. APERTURE setting
This is use for edge enhancement. Normal setting is OFF.
3.5.3.5. NR setting
This is use to reduce subtle noise in analog signal etc. Normal setting is OFF.
MEMORY 1
BRIGHT
CONTRAST
WHITE BALANCE
GAMMA
DITHER
CSC
APERTURE
NR
Summary of Contents for VS-SH10U
Page 1: ...DLPTM Projector VS SH10U Set up and Installation Manual August 30 2002...
Page 8: ...First edition 8 1 2 Outline drawings 1 2 1 Circuit Box unit mm...
Page 9: ...VS SH10U Set up and Installation Manual 9 1 2 2 Optical Unit unit mm...
Page 56: ...First edition 56 6 2 6 axis adjuster Model Screw holes VS SH10U c e h j...